Gurgel BR-800

Gurgel BR-800
Overview
Manufacturer	Gurgel
Also called	Gurgel 280
Production	1988-1992
Assembly	Rio Claro, São Paulo, Brazil
Designer	João do Amaral Gurgel
Body and chassis
Class	City car (A)
Body style	2–door sedan
Layout	front engine, rear-wheel drive
Related	Gurgel Motomachine
Powertrain
Engine	792 cc Enertron H2
Transmission	four-speed manual
Dimensions
Wheelbase	1,900 mm (75 in)
Length	3,195 mm (126 in)
Width	1,460 mm (57 in)
Height	1,460 mm (57 in)
Curb weight	650 kg (1,433 lb)
Chronology
Successor	Gurgel Supermini

The Gurgel BR-800 is a Brazilian city car produced by Gurgel between 1988 and early 1992. The project started under the acronym CENA, meaning "National Economical Car" ("Carro Econômico NAcional", in Portuguese), designed to be essentially a small car for urban daily use. It received great attention and good reviews from critics, regarding the mechanic solutions, comfort, drivability and stability.^[1] When it was introduced in September 1987, the car was named the Gurgel 280 but by the time sales started it was changed to the BR-800.^[2] The car could only be purchased if the buyer also bought 750 shares in Gurgel, making it considerably more expensive than the much bigger and more capable Chevrolet Chevette, the then cheapest new car available in Brazil.^[3]

The project was favoured by Brazil's then-president, José Sarney, who ensured large unsecured loans for Gurgel's project and also allowed it to be sold at an especially low sales tax. Nonetheless, only about 4,000 were built in around four years of production.^[4]

The engine, called the Gurgel Enertron, was developed by Gurgel themselves. This is a water-cooled gasoline engine with two opposed piston cylinders. Essentially a halved VW boxer-four engine, it was developed with either 650 cc or 800 cc displacements, generating 26 PS (19 kW) and 30 PS (22 kW) respectively.^[5] It had a very simple and robust design, eliminating totally the V-belt by using the crankshaft for activating the alternator, and the camshaft for water and oil pump. In a later stage of development, the V-belt was reintroduced for the alternator, so that the battery would be charged even at low engine speeds.

The car's ride also came in for heavy complaints, due to the use of Gurgel's own "Springshock" suspension. This system, made mainly from synthetic materials, was abandoned for a more conventional setup for the succeeding Supermini.^[6]

The body was made using Plasteel, designed for four passengers, and considered by some to have a good level of space for passengers and the driver, despite being less than 3.2 m (10 ft) in length.^[7] During development, the little 650 cc engine was set aside, and only a 32 PS version of the 800 cc engine entered production. Nonetheless, the car was considered underpowered,^[4] with a top speed of 110 km/h (68 mph).^[8] Power was increased to 36 PS (26 kW) for the later SL version. The body, in order to save costs, has flat windows.^[3]

Between 1988 and July 1990, Gurgel BR-800 had the IPI tax reduced to 7%, thus giving a great advantage for Gurgel. In July 1990, the Brazilian president Fernando Collor decided to give a similar tax cut to all cars with engines smaller than one litre, thus equating the price of the BR-800 with those of significantly larger and more usable cars, reducing the BR-800 sales to a trickle.^[4]

By the end of 1991, the BR-800 received some restyling and other improvements, it was now sold under the name BR-SL. This then received some general improvements and a more thorough restyling, evolving into the Gurgel Supermini.

• Automobile Catalog
• Gurgel 800 General information and forums about Gurgel cars (in Portuguese)