Lipno Reservoir

You can help expand this article with text translated from the corresponding article in Czech. (March 2024) Click [show] for important translation instructions. Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia. Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article. You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing Czech Wikipedia article at [[:cs:Vodní nádrž Lipno]]; see its history for attribution. You may also add the template {{Translated|cs|Vodní nádrž Lipno}} to the talk page. For more guidance, see Wikipedia:Translation.

Lipno Reservoir
Lipno Reservoir
Location	Lipno nad Vltavou
Coordinates	48°42′N 14°04′E / 48.700°N 14.067°E / 48.700; 14.067
Type	reservoir
Primary inflows	Vltava
Primary outflows	Vltava
Basin countries	Czech Republic
Max. length	42 km (26 mi)
Max. width	5 km (3.1 mi)
Surface area	48.70 km2 (18.80 sq mi)
Average depth	6.5 m (21 ft)
Max. depth	25 m (82 ft)
Water volume	309,502,000 m3 (250,917 acre⋅ft)
Surface elevation	725.6 m (2,381 ft)
Islands	1

The Lipno Reservoir (Czech: přehrada Lipno) is a dam and hydroelectric plant constructed along the Vltava River in the Czech Republic. It is the largest water area in the Czech Republic.

Due to frequent flooding and subsequent damage, the Vltava River in Southern Bohemia was problematic for Český Krumlov and other settlements situated on it. To harness the power of the river, and to prevent continued catastrophe, it was decided that a hydroelectric plant would be built high on the Vltava.^[1] Preparatory work at the municipality of Lipno nad Vltavou began in 1951. Construction on the dam began in 1952, and the dam was completed in 1960.^[2]

The stream bed of the Vltava near Lipno was chosen because it has a slight incline, facilitating the construction of a reservoir there. The dam is built along the highest-elevated stage of the Vltava River's cascade^[3] (roughly 726 metres above sea level), thus enabling large amounts of hydropower out-put. This area is mountainous, and borders the Šumava National Park and Nature Reserve. A smaller reservoir near Vyšší Brod is linked to the main reservoir by an artificial underground waterway. This smaller reservoir, named 'Lipno II', serves to level the water of the main reservoir.

Lipno Hydro Power Plant has two turbines with a nominal capacity of 64 MW each^[4] having a total capacity of 128 MW.

• Media related to Lipno Reservoir at Wikimedia Commons
• http://www.pvl.cz