Unless the copyright status of the text of this page or section is clarified and determined to be compatible with Wikipedia's content license, the problematic text and revisions or the entire page may be deleted one week after the time of its listing (i.e. after 02:00, 30 April 2024 (UTC)).
What can I do to resolve the issue?
If you hold the copyright to this text, you can license it in a manner that allows its use on Wikipedia.
To confirm your permission, you can either display a notice to this effect at the site of original publication or send an e-mail from an address associated with the original publication to permissions-enwikimedia.org or a postal letter to the Wikimedia Foundation. These messages must explicitly permit use under CC BY-SA and the GFDL. See Wikipedia:Donating copyrighted materials.
Note that articles on Wikipedia must be written from a neutral point of view and must be verifiable in published third-party sources; consider whether, copyright issues aside, your text is appropriate for inclusion in Wikipedia.
Otherwise, you may rewrite this page without copyright-infringing material. Your rewrite should be placed on this page, where it will be available for an administrator or clerk to review it at the end of the listing period. Follow this link to create the temporary subpage. Please mention the rewrite upon completion on this article's discussion page.
Simply modifying copyrighted text is not sufficient to avoid copyright infringement—if the original copyright violation cannot be cleanly removed or the article reverted to a prior version, it is best to write the article from scratch. (See Wikipedia:Close paraphrasing.)
For license compliance, any content used from the original article must be properly attributed; if you use content from the original, please leave a note at the top of your rewrite saying as much. You may duplicate non-infringing text that you had contributed yourself.
It is always a good idea, if rewriting, to identify the point where the copyrighted content was imported to Wikipedia and to check to make sure that the contributor did not add content imported from other sources. When closing investigations, clerks and administrators may find other copyright problems than the one identified. If this material is in the proposed rewrite and cannot be easily removed, the rewrite may not be usable.
Place {{copyvio/bottom}} at the end of the portion you want to blank. If nominating the entire page, please place this template at the top of the page and set the "fullpage" parameter to "yes".
On 30 June 2020, Metso's partial demerger and combination of Metso Minerals business unit and Outotec took place.[3][4] Two new companies started operations on 1 July 2020: Neles and Metso Outotec.[5]
Metso was created through the merger of Valmet and Rauma Oy [fi] in 1999. In 2013, Metso demerged into two separate companies: Metso Corporation and Valmet Corporation.
Metso was created on 1 July 1999 through the merger of Valmet, a paper and board machine supplier, and Rauma, which focused on fiber technology, rock crushing and flow control solutions.
In 1998,Rauma's businesses included:
Timberjack forest machines
Sunds Defibrator fiber technology equipment
Nordberg rock crushers
Neles Controls valve-control systems
The new company had overlapping operations and to some extent the same customer base too. The purpose of the merger was the will to grow particularly in process technology. For a bigger company it seemed to be easier to survive better in international markets. The company's scope of business became more diversified than before and there were critics of the merger saying that easier growth would have been achieved if the two companies would have each acquired a competitor in their own core business sector.
The new company had offices in 50 countries and 32,000 employees after a personnel reduction of 2,000 people, and it operated in four sectors:
The name for the new company was sought in an employee contest. There were three suggestions for the name Metso among the total 6,500 suggestions. All the three who had suggested the name Metso received a monetary prize. Metso is the Finnish word for Wood Grouse, also known as The Western Capercaillie (Tetrao urogallus), Heather Cock or Capercaillie. Wood Grouse is found across Europe lives e.g. in Finnish pine forests. Metso's logo mimics the shape of the wings of a Wood Grouse.[6]
Sundberg and Hakala did not stay that long in Metso's management. Tor Bergman became the new President and CEO in 2001. In 2001, Metso's net sales were EUR 4.7 billion, and it had 28,500 employees.
The new Metso Group was divided into three business areas:
Fiber and Paper Technology
Automation and Control Technology
Machinery
The merger of Valmet and Rauma had given direction to the company's future focus on
Pulp, paper and energy production technologies
Equipment needed for the construction, mining and recycling industries
Automation and control systems for the process industry
This formed Metso's three main business areas:
Metso Paper
Metso Minerals
Metso Automation
Business operations outside the core businesses were divested. For example, in 2000, Metso acquired the roll cover business and paper machine servicing operations, including paper machine technologies, from the American paper machine manufacturer Beloit (corporation), and the American John Deere aka Deere & Company acquired the forest machine manufacturer Timberjack from Metso. In 2001, Metso acquired the Swedish Svedala Industri AB, a manufacturer of rock and minerals processing equipment.
In 2002, Metso announced that it would not achieve its profit targets for two years, and a loss in excess of EUR 300 million was recorded for July–September. The reason for difficulties was Svedala. In 2003, a loss of over EUR 200 million was recorded and in September 2003, President and CEO Bergman was forced to resign because of the company's poor results. Jorma Eloranta was selected as Bergman's successor. He started in March 2004.
Between 2004 and 2007, Metso's net sales increased from EUR 3.6 billion to EUR 6.3 billion, and the profit margin rose from 5.5 percent to 9.3 percent. During Eloranta's tenure, Metso increased its net sales and improved its financial performance for 19 consecutive quarters (2004–2008).
Metso's business functions had divided into three sectors (Metso Paper, Metso Minerals and Metso Automation) with over 28,000 employees and net sales of EUR 6.4 billion. In fact, at that point, it was Metso's best year ever in terms of operating profit and net sales, but the rapidly weakened market situation in the second half of the year forced Metso to initiate sizable measures to adjust its operations.
By 2008, Metso had become Finland's ninth largest company and the number of Metso shareholders had increased from 25,000 to 42,000. Metso strengthened its market position and service capacity in growing markets, particularly in India and China. During 2008, the expansions to the Ahmedabad foundry and the Bawal factory in India were completed.
Metso also purchased the paper machine technology of Japanese Mitsubishi Heavy Industries’ (MHI), making Metso the sole owner of Beloit's paper machinery intellectual property globally.
In September 2008, Metso sold 83% of its foundry in Sweden to an investment group assembled by the Primaca investment company. The Metso Foundries Karlstad unit specialized in casts of wind power components, diesel engine blocks and Yankee cylinders for paper machines.
By 2009, half of Metso's orders received in 2009 came from emerging markets, compared to less than one fifth in 1999. In the same year, Metso entered into a combination agreement with Tamfelt, one of the world's leading suppliers of technical textile. Subsequently, Metso made a public exchange offer for all of Tamfelt's shares.
In the first half of 2009, Metso laid off over 700 employees and shut down several small units in e.g. Tampere, Turku, Oulu and Hollola. The operations of the shut-down units were integrated with the Järvenpää and Jyväskylä units. Metso's strategy for the 2000s was to manufacture wide, high-speed paper machines and discontinue its traditional paper machine concepts.
Matti Kähkönen was appointed the new President and CEO of Metso Corporation on 1 March 2011. Previously, Kähkönen had headed Metso's Mining and Construction segment. Despite the global economic uncertainty, Metso's profitability grew steadily in 2011. The services business, with a value of over three billion euros, accounted for about 40 percent of orders received in 2011.
In September 2012, Metso announced the need for a personnel reduction of more than 600 Finnish employees in several of its business units serving the paper industry and paper production. The reason for the reductions is structural change in the industry and due to that the weakening of paper business unit's competitiveness and profitability: competition has increased, demand for paper machine and foundry products has weakened. Customers want cheaper solutions than before. Metso had planned to give extra dividend for its shareholders but after the decision of paying dividends while cutting staff was criticized e.g. by personnel and the Finnish politics the decision was cancelled.
In 2012, Metso agreed to form a joint venture with China's LiuGong Group to develop the track-mounted crushing business in China, consolidated its valve operations in the United States into new premises in Massachusetts and opened a new valve supply and service center in Vadodara, India. In the same year, Metso acquired the Korean valve manufacturer Valstone Control Inc., U.S. software company ExperTune Inc. and 75 percent of the Chinese crushing and screening equipment producer Shaorui Heavy Industries.
Metso Recycling business offers metal and waste recycling equipment and services globally. On 1 September 2011, Metso announced that the Recycling business would be managed as a separate entity while Metso reviews other strategic alternatives for it. As part of this process, Metso evaluated both external and internal options. On 25 October 2012, Metso announced that Metso Recycling will be integrated into Mining and Construction as of 1 December 2012.
In August 2013, Metso closed the acquisition of Chinese manganese steel foundry JX.[7]
On 1 October 2013, the Extraordinary General Meeting approved the demerger of Metso into two companies.[8] At the start of 2014, Metso Corporation's Mining and Construction business and Automation business formed the new Metso Corporation and Metso's Pulp, Paper and Power business formed a new independent company under the name Valmet Corporation.
In December 2013 Metso reduced its holding in Valmet Automotive to approximately 41%. As a result of this arrangement, Valmet Automotive ceased to be a Metso subsidiary.[9]
In 2015, Metso divested its Process Automation Systems (PAS) business to Valmet, focusing on their mining and aggregates industries operations and on the flow control systems manufacturing business.[10]
2020 partial demerger and combination of Metso Minerals and Outotec[edit]
In July 2019, it was announced that Metso and Outotec are planning to combine Metso’s Minerals business unit with Outotec. Their combination is complementary and the new company, Metso Outotec will leverage their strengths. The new company’s headquarters will be in Finland and it will maintain its listing on Nasdaq Helsinki. Before the transaction can be completed, the approval is needed by a majority of two-thirds of votes cast and shares represented at the respective EGMs of Metso and Outotec, as well as regulatory approvals.[11]
All regulatory approvals were received by 18 June 2020[12] and partial demerger was registered on 30 June 2020.[3] Metso Outotec and Neles started operations on 1 July 2020.
For minerals processing in the mining, aggregates and recycling industries, Metso's offering includes crushers, screens, mining solutions, grinding mills and media, conveyors, solutions for bulk materials handling as well as process, pyro processing and recycling equipment.
Metso's flow control business develops and produces valves and services for various process industries. The business sector was formed in 1999 through the merger of the process automation systems manufacturer Valmet Automation and Neles Controls, a manufacturer of valves and flow control systems.
From Wikipedia the free encyclopedia
