M116 Husky
From Wikipedia the free encyclopedia
M116 Husky | |
---|---|
Place of origin | United States |
Service history | |
In service | 1960-70s |
Used by | United States |
Wars | Vietnam War |
Production history | |
Designer | Pacific Car and Foundry |
Manufacturer | Blaw-Knox Pacific Car and Foundry (M733) |
No. built | 197 93 (M733) |
Variants | M733 |
Specifications | |
Mass | 10,600 lb (4,800 kg) |
Length | 15 ft 6 in (4.72 m) |
Width | 6.8 feet (2.1 m) |
Height | 6 ft 9 in (2.06 m) |
Crew | 1 |
Passengers | 13 |
Armor | none |
Main armament | none |
Engine | Chevrolet V8 |
Payload capacity | 3,000 lb (1,400 kg) |
Transmission | Hydra-Matic |
Ground clearance | 15.5 in (39 cm) |
Operational range | 300 mi (480 km) |
Maximum speed | 37 mph (60 km/h) land 3.7 mph (6.0 km/h) water |
The M116 Husky was a tracked amphibious cargo carrier/marginal terrain vehicle that served with the United States Marine Corps.
Design
[edit]The M116 was a lightweight low-silhouette vehicle designed to transport cargo or personnel over unimproved roads, loose sand, soft marshy terrain and inland waterways. Its low ground pressure of 1.67 to 2.74 psi (11.5 to 18.9 kPa) when fully loaded gave good mobility on marginal terrain. [1]: E-1–2
The M116 was designed by Pacific Car and Foundry as a replacement for the M76 Otter. Pacific Car and Foundry built four prototypes and then three pre-production models, however the production contract was awarded to Blaw-Knox which produced 197.[2]
Variants
[edit]The M733 was an armored variant of the M116 with steel armour plates added to provide ballistic protection capable of stopping .30-caliber ball ammunition. The purpose of the vehicle was to provide small arms protection for infantry security elements accompanying marginal terrain vehicles. The primary armament was one M60 machine gun, but two other pintle mounts were provided for additional M60s. The M733 could also mount the M2 Browning .50 caliber machine gun or an 81mm mortar.[1]: F-1–2 The M733 was produced by Pacific Car and Foundry which built 93 with the first deliveries occurring in 1966.[2]
History
[edit]Both the M116 and M733 served with the Marines in the Vietnam War.[3] The M116E1 was placed into service in April 1969 by the 11th Motor Transport Battalion to support the 1st Marine Division in the low and often inundated areas south of Danang. Virtually unaffected by weather, the M116 had the effect of reducing reliance on helicopter support. The M733 was placed into service in August as a convoy escort.[4]
References
[edit]- ^ a b Carrey, Richard (1981). Amphibious Vehicles. United States Marine Corps Development and Education Command. This article incorporates text from this source, which is in the public domain.
- ^ a b Doyle, David (2003). Standard Catalog of U.S. Military Vehicles - 2nd Edition. Penhuin. ISBN 978-0873495080.
- ^ Gilbert, Ed (2006). The US Marine Corps in the Vietnam War: III Marine Amphibious Force 1965–75. Osprey Publishing. p. 38. ISBN 978-1841769875.
- ^ Smith, Charles (1988). U.S. Marines in Vietnam: High Mobility and Standdown 1969 (PDF). History and Museums Division, Headquarters, U.S. Marine Corps. p. 272. ISBN 978-1494287627. This article incorporates text from this source, which is in the public domain.