OpenEVSE
From Wikipedia the free encyclopedia
 | This article contains content that is written like an advertisement. (December 2023) |
OpenEVSE is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.[1] The charger is composed of open-source software[2] and hardware which can be made by individuals.[3]
The project started in February 2011[4][1] with an experiment aimed at generating the SAE J1772 pilot signal[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU. Subsequent experiments continued until a prototype J1772-compatible controller was created. As of now, OpenEVSE powers charging stations all over the world.[6]
References[edit]
- ^ a b OpenEVSE About page
- ^ OpenEVSE at github
- ^ Software and hardware needed to build the OpenEVSE charger
- ^ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.
- ^ "openEVSE - openalia". Retrieved 2019-05-01.
- ^ "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. 6 March 2019. Archived from the original on 2019-04-12. Retrieved 2019-04-11.
External links[edit]
.JPG){kind=small} | This article about an automotive part or component is a stub. You can help Wikipedia by expanding it. |