Plasmonics

From Wikipedia the free encyclopedia

For the academic journal, see Plasmonics (journal).
A plasmonic waveguide design to facilitate negative refraction in visible spectrum

Plasmonics or nanoplasmonics[1] refers to the generation, detection, and manipulation of signals at optical frequencies along metal-dielectric interfaces in the nanometer scale.[2] Inspired by photonics, plasmonics follows the trend of miniaturizing optical devices (see also nanophotonics), and finds applications in sensing, microscopy, optical communications, and bio-photonics.[3][4]

Principles[edit]

Main articles: Surface plasmon, surface plasmon polariton, and localized surface plasmon

Plasmonics typically utilizes surface plasmon polaritons (SPPs),[2] that are coherent electron oscillations travelling together with an electromagnetic wave along the interface between a dielectric (e.g. glass, air) and a metal (e.g. silver, gold). The SPP modes are strongly confined to their supporting interface, giving rise to strong light-matter interactions. In particular, the electron gas in the metal oscillates with the electro-magnetic wave. Because the moving electrons are scattered, ohmic losses in plasmonic signals are generally large, which limits the signal transfer distances to the sub-centimeter range, [5] unless hybrid optoplasmonic light guiding networks,[6][7][8] or plasmon gain amplification[9] are used. Besides SPPs, localized surface plasmon modes supported by metal nanoparticles are referred to as plasmonics modes. Both modes are characterized by large momentum values, which enable strong resonant enhancement of the local density of photon states,[10] and can be utilized to enhance weak optical effects of opto-electronic devices.[4]

Motivation and current challenges[edit]

An effort is currently being made to integrate plasmonics with electric circuits, or in an electric circuit analog, to combine the size efficiency of electronics with the data capacity of photonic integrated circuits (PIC).[11] While gate lengths of CMOS nodes used for electrical circuits are ever decreasing, the size of conventional PICs is limited by diffraction, thus constituting a barrier for further integration. Plasmonics could bridge this size mismatch between electronic and photonic components. At the same time, photonics and plasmonics can complement each other, since, under the right conditions, optical signals can be converted to SPPs and vice versa.

One of the biggest issues in making plasmonic circuits a feasible reality is the short propagation length of surface plasmons. Typically, surface plasmons travel distances only on the scale of millimeters before damping diminishes the signal.[12] This is largely due to ohmic losses, which become increasingly important the deeper the electric field penetrates into the metal. Researchers are attempting to reduce losses in surface plasmon propagation by examining a variety of materials, geometries, the frequency and their respective properties.[13] New promising low-loss plasmonic materials include metal oxides and nitrides[14] as well as graphene.[15] Key to more design freedom are improved fabrication techniques that can further contribute to reduced losses by reduced surface roughness.

Another foreseeable barrier plasmonic circuits will have to overcome is heat; heat in a plasmonic circuit may or may not exceed the heat generated by complex electronic circuits.[12] It has recently been proposed to reduce heating in plasmonic networks by designing them to support trapped optical vortices, which circulate light powerflow through the inter-particle gaps thus reducing absorption and Ohmic heating,[16][17][18] In addition to heat, it is also difficult to change the direction of a plasmonic signal in a circuit without significantly reducing its amplitude and propagation length.[11] One clever solution to the issue of bending the direction of propagation is the use of Bragg mirrors to angle the signal in a particular direction, or even to function as splitters of the signal.[19] Finally, emerging applications of plasmonics for thermal emission manipulation [20] and heat-assisted magnetic recording [21] leverage Ohmic losses in metals to obtain devices with new enhanced functionalities.

Waveguiding[edit]

The field distribution on a hybrid plasmonic waveguide

Optimal plasmonic waveguide designs strive to maximize both the confinement and propagation length of surface plasmons within a plasmonic circuit. Surface plasmon polaritons are characterized by a complex wave vector, with components parallel and perpendicular to the metal-dielectric interface. The imaginary part of the wave vector component is inversely proportional to the SPP propagation length, while its real part defines the SPP confinement.[22] The SPP dispersion characteristics depend on the dielectric constants of the materials comprising the waveguide. The propagation length and confinement of the surface plasmon polariton wave are inversely related. Therefore, stronger confinement of the mode typically results in shorter propagation lengths. The construction of a practical and usable surface plasmon circuit is heavily dependent on a compromise between propagation and confinement. Maximizing both confinement and propagation length helps mitigate the drawbacks of choosing propagation length over confinement and vice versa. Multiple types of waveguides have been created in pursuit of a plasmonic circuit with strong confinement and sufficient propagation length. Some of the most common types include insulator-metal-insulator (IMI),[23] metal-insulator-metal (MIM),[24] dielectric loaded surface plasmon polariton (DLSPP),[25][26] gap plasmon polariton (GPP),[27] channel plasmon polariton (CPP),[28] wedge surface plasmon polariton (wedge),[29] and hybrid opto-plasmonic waveguides and networks.[30][31] Dissipation losses accompanying SPP propagation in metals can be mitigated by gain amplification or by combining them into hybrid networks with photonic elements such as fibers and coupled-resonator waveguides.[30][31] This design can result in the previously mentioned hybrid plasmonic waveguide, which exhibits subwavelength mode on a scale of one-tenth of the diffraction limit of light, along with an acceptable propagation length.[32][33][34][35]

Coupling[edit]

The input and output ports of a plasmonic circuit will receive and send optical signals, respectively. To do this, coupling and decoupling of the optical signal to the surface plasmon is necessary.[36] The dispersion relation for the surface plasmon lies entirely below the dispersion relation for light, which means that for coupling to occur additional momentum should be provided by the input coupler to achieve the momentum conservation between incoming light and surface plasmon polariton waves launched in the plasmonic circuit.[11] There are several solutions to this, including using dielectric prisms, gratings, or localized scattering elements on the surface of the metal to help induce coupling by matching the momenta of the incident light and the surface plasmons.[37] After a surface plasmon has been created and sent to a destination, it can then be converted into an electrical signal. This can be achieved by using a photodetector in the metal plane, or decoupling the surface plasmon into freely propagating light that can then be converted into an electrical signal.[11] Alternatively, the signal can be out-coupled into a propagating mode of an optical fiber or waveguide.

Active devices[edit]

The progress made in surface plasmons over the last 50 years has led to the development in various types of devices, both active and passive. A few of the most prominent areas of active devices are optical, thermo-optical, and electro-optical. All-optical devices have shown the capacity to become a viable source for information processing, communication, and data storage when used as a modulator. In one instance, the interaction of two light beams of different wavelengths was demonstrated by converting them into co-propagating surface plasmons via cadmium selenide quantum dots.[38] Electro-optical devices have combined aspects of both optical and electrical devices in the form of a modulator as well. Specifically, electro-optic modulators have been designed using evanescently coupled resonant metal gratings and nanowires that rely on long-range surface plasmons (LRSP).[39] Likewise, thermo-optic devices, which contain a dielectric material whose refractive index changes with variation in temperature, have also been used as interferometric modulators of SPP signals in addition to directional-coupler switches. Some thermo-optic devices have been shown to utilize LRSP waveguiding along gold stripes that are embedded in a polymer and heated by electrical signals as a means for modulation and directional-coupler switches.[40] Another potential field lies in the use of spasers in areas such as nanoscale lithography, probing, and microscopy.[41]

Passive devices[edit]

Although active components play an important role in the use of plasmonic circuitry, passive circuits are just as integral and, surprisingly, not trivial to make. Many passive elements such as prisms, lenses, and beam splitters can be implemented in a plasmonic circuit, however fabrication at the nano scale has proven difficult and has adverse effects. Significant losses can occur due to decoupling in situations where a refractive element with a different refractive index is used. However, some steps have been taken to minimize losses and maximize compactness of the photonic components. One such step relies on the use of Bragg reflectors, or mirrors composed of a succession of planes to steer a surface plasmon beam. When optimized, Bragg reflectors can reflect nearly 100% of the incoming power.[11] Another method used to create compact photonic components relies on CPP waveguides as they have displayed strong confinement with acceptable losses less than 3 dB within telecommunication wavelengths.[42] Maximizing loss and compactness with regards to the use of passive devices, as well as active devices, creates more potential for the use of plasmonic circuits.

See also[edit]

References[edit]

  1. ^ Novotny, Lukas; Hecht, Bert (2012). Principles of Nano-Optics. Norwood: Cambridge University Press. ISBN 9780511794193.
  2. ^ a b Maier, S. A.; Brongersma, M. L.; Kik, P. G.; Meltzer, S.; Requicha, A. A. G.; Atwater, H. A. (2001). "Plasmonics-A Route to Nanoscale Optical Devices". Advanced Materials. 13 (19): 1501–1505. doi:10.1002/1521-4095(200110)13:19<1501::AID-ADMA1501>3.0.CO;2-Z.
  3. ^ Gramotnev, Dmitri K.; Bozhevolnyi, Sergey I. (2010). "Plasmonics beyond the diffraction limit". Nature Photonics. 4 (2): 83–91. Bibcode:2010NaPho...4...83G. doi:10.1038/nphoton.2009.282.
  4. ^ a b Marques Lameirinhas, Ricardo A.; N Torres, João Paulo; Baptista, António; Marques Martins, Maria João. "A new method to analyse the role of surface plasmon polaritons on dielectric-metal interfaces". IEEE Photonics Journal. doi:10.1109/JPHOT.2022.3181967.
  5. ^ Barnes, William L (2006-03-21). "Surface plasmon–polariton length scales: a route to sub-wavelength optics". Journal of Optics A. 8 (4): S87–S93. doi:10.1088/1464-4258/8/4/s06.
  6. ^ Boriskina, S. V.; Reinhard, B. M. (2011-02-07). "Spectrally and spatially configurable superlenses for optoplasmonic nanocircuits". Proceedings of the National Academy of Sciences. 108 (8): 3147–3151. arXiv:1110.6822. Bibcode:2011PNAS..108.3147B. doi:10.1073/pnas.1016181108. PMC 3044402. PMID 21300898.
  7. ^ Ahn, Wonmi; Hong, Yan; Boriskina, Svetlana V.; Reinhard, Björn M. (2013-04-25). "Demonstration of Efficient On-Chip Photon Transfer in Self-Assembled Optoplasmonic Networks". ACS Nano. 7 (5): 4470–4478. doi:10.1021/nn401062b. PMID 23600526.
  8. ^ Santiago-Cordoba, Miguel A.; Boriskina, Svetlana V.; Vollmer, Frank; Demirel, Melik C. (2011-08-15). "Nanoparticle-based protein detection by optical shift of a resonant microcavity". Applied Physics Letters. 99 (7): 073701. arXiv:1108.2337. Bibcode:2011ApPhL..99g3701S. doi:10.1063/1.3599706. S2CID 54703911.
  9. ^ Grandidier, Jonathan; des Francs, Gérard Colas; Massenot, Sébastien; Bouhelier, Alexandre; Markey, Laurent; Weeber, Jean-Claude; Finot, Christophe; Dereux, Alain (2009-08-12). "Gain-Assisted Propagation in a Plasmonic Waveguide at Telecom Wavelength". Nano Letters. 9 (8): 2935–2939. Bibcode:2009NanoL...9.2935G. doi:10.1021/nl901314u. PMID 19719111.
  10. ^ S.V. Boriskina, H. Ghasemi, and G. Chen, Materials Today, vol. 16, pp. 379-390, 2013
  11. ^ a b c d e Ebbesen, Thomas W.; Genet, Cyriaque; Bozhevolnyi, Sergey I. (2008). "Surface-plasmon circuitry". Physics Today. 61 (5): 44–50. Bibcode:2008PhT....61e..44E. doi:10.1063/1.2930735.
  12. ^ a b Brongersma, Mark. "Are Plasmonics Circuitry Wave of Future?" Stanford School of Engineering. N.p., n.d. Web. 26 Nov. 2014. <http://engineering.stanford.edu/research-profile/mark-brongersma-mse>.
  13. ^ Ozbay, E. (2006-01-13). "Plasmonics: Merging Photonics and Electronics at Nanoscale Dimensions". Science. 311 (5758): 189–193. Bibcode:2006Sci...311..189O. doi:10.1126/science.1114849. hdl:11693/38263. PMID 16410515. S2CID 2107839.
  14. ^ Naik, Gururaj V.; Kim, Jongbum; Boltasseva, Alexandra (2011-09-06). "Oxides and nitrides as alternative plasmonic materials in the optical range [Invited]". Optical Materials Express. 1 (6): 1090–1099. arXiv:1108.0993. Bibcode:2011OMExp...1.1090N. doi:10.1364/ome.1.001090. S2CID 13870978.
  15. ^ Vakil, A.; Engheta, N. (2011-06-09). "Transformation Optics Using Graphene". Science. 332 (6035): 1291–1294. Bibcode:2011Sci...332.1291V. doi:10.1126/science.1202691. PMID 21659598. S2CID 29589317.
  16. ^ Boriskina, Svetlana V.; Reinhard, Björn M. (2012). "Molding the flow of light on the nanoscale: from vortex nanogears to phase-operated plasmonic machinery". Nanoscale. 4 (1): 76–90. doi:10.1039/c1nr11406a. PMC 3339274. PMID 22127488.
  17. ^ Ahn, Wonmi; Boriskina, Svetlana V.; Hong, Yan; Reinhard, Björn M. (2011-12-21). "Electromagnetic Field Enhancement and Spectrum Shaping through Plasmonically Integrated Optical Vortices". Nano Letters. 12 (1): 219–227. doi:10.1021/nl203365y. PMC 3383062. PMID 22171957.
  18. ^ S.V. Boriskina "Plasmonics with a twist: taming optical tornadoes on the nanoscale," chapter 12 in: Plasmonics: Theory and applications (T.V. Shahbazyan and M.I. Stockman Eds.) Springer 2013
  19. ^ Veronis, Georgios; Fan, Shanhui (2005-09-26). "Bends and splitters in metal-dielectric-metal subwavelength plasmonic waveguides". Applied Physics Letters. 87 (13): 131102. Bibcode:2005ApPhL..87m1102V. doi:10.1063/1.2056594.
  20. ^ Boriskina, Svetlana; Tong, Jonathan; Huang, Yi; Zhou, Jiawei; Chiloyan, Vazrik; Chen, Gang (2015-06-18). "Enhancement and Tunability of Near-Field Radiative Heat Transfer Mediated by Surface Plasmon Polaritons in Thin Plasmonic Films". Photonics. 2 (2): 659–683. arXiv:1604.08130. Bibcode:2015Photo...2..659B. doi:10.3390/photonics2020659.
  21. ^ Challener, W. A.; Peng, Chubing; Itagi, A. V.; Karns, D.; Peng, Wei; et al. (2009-03-22). "Heat-assisted magnetic recording by a near-field transducer with efficient optical energy transfer". Nature Photonics. 3 (4): 220–224. Bibcode:2009NaPho...3..220C. doi:10.1038/nphoton.2009.26.
  22. ^ Sorger, Volker J.; Oulton, Rupert F.; Ma, Ren-Min; Zhang, Xiang (2012). "Toward integrated plasmonic circuits". MRS Bulletin. 37 (8): 728–738. doi:10.1557/mrs.2012.170. S2CID 15391453.
  23. ^ Verhagen, Ewold; Spasenović, Marko; Polman, Albert; Kuipers, L. (Kobus) (2009-05-19). "Nanowire Plasmon Excitation by Adiabatic Mode Transformation". Physical Review Letters. 102 (20): 203904. Bibcode:2009PhRvL.102t3904V. doi:10.1103/physrevlett.102.203904. PMID 19519030.
  24. ^ Dionne, J. A.; Lezec, H. J.; Atwater, Harry A. (2006). "Highly Confined Photon Transport in Subwavelength Metallic Slot Waveguides". Nano Letters. 6 (9): 1928–1932. Bibcode:2006NanoL...6.1928D. doi:10.1021/nl0610477. PMID 16968003.
  25. ^ Steinberger, B.; Hohenau, A.; Ditlbacher, H.; Stepanov, A. L.; Drezet, A.; Aussenegg, F. R.; Leitner, A.; Krenn, J. R. (2006-02-27). "Dielectric stripes on gold as surface plasmon waveguides". Applied Physics Letters. 88 (9): 094104. Bibcode:2006ApPhL..88i4104S. doi:10.1063/1.2180448.
  26. ^ Krasavin, Alexey V.; Zayats, Anatoly V. (2010-05-19). "Silicon-based plasmonic waveguides". Optics Express. 18 (11): 11791–9. Bibcode:2010OExpr..1811791K. doi:10.1364/oe.18.011791. PMID 20589040.
  27. ^ Jung, K.-Y.; Teixeira, F.L.; Reano, R.M. (2009). "Surface Plasmon Coplanar Waveguides: Mode Characteristics and Mode Conversion Losses". IEEE Photonics Technology Letters. 21 (10): 630–632. Bibcode:2009IPTL...21..630J. doi:10.1109/lpt.2009.2015578. S2CID 6788393.
  28. ^ Bozhevolnyi, Sergey I.; Volkov, Valentyn S.; Devaux, Eloïse; Laluet, Jean-Yves; Ebbesen, Thomas W. (2006). "Channel plasmon subwavelength waveguide components including interferometers and ring resonators". Nature. 440 (7083): 508–511. Bibcode:2006Natur.440..508B. doi:10.1038/nature04594. PMID 16554814.
  29. ^ Pile, D. F. P.; Ogawa, T.; Gramotnev, D. K.; Okamoto, T.; Haraguchi, M.; Fukui, M.; Matsuo, S. (2005-08-08). "Theoretical and experimental investigation of strongly localized plasmons on triangular metal wedges for subwavelength waveguiding". Applied Physics Letters. 87 (6): 061106. Bibcode:2005ApPhL..87f1106P. doi:10.1063/1.1991990.
  30. ^ a b Boriskina, S. V.; Reinhard, B. M. (2011-02-07). "Spectrally and spatially configurable superlenses for optoplasmonic nanocircuits". Proceedings of the National Academy of Sciences. 108 (8): 3147–3151. arXiv:1110.6822. Bibcode:2011PNAS..108.3147B. doi:10.1073/pnas.1016181108. PMC 3044402. PMID 21300898.
  31. ^ a b Ahn, Wonmi; Hong, Yan; Boriskina, Svetlana V.; Reinhard, Björn M. (2013-04-25). "Demonstration of Efficient On-Chip Photon Transfer in Self-Assembled Optoplasmonic Networks". ACS Nano. 7 (5): 4470–4478. doi:10.1021/nn401062b. PMID 23600526.
  32. ^ M. Z. Alam, J. Meier, J. S. Aitchison, and M. Mojahedi, "Super mode propagation in low index medium", Paper ID: JThD112, CLEO/QELS 2007.
  33. ^ Sorger, Volker J.; Ye, Ziliang; Oulton, Rupert F.; Wang, Yuan; Bartal, Guy; Yin, Xiaobo; Zhang, Xiang (2011-05-31). "Experimental demonstration of low-loss optical waveguiding at deep sub-wavelength scales". Nature Communications. 2 (1): 331. Bibcode:2011NatCo...2..331S. doi:10.1038/ncomms1315.
  34. ^ Oulton, R. F.; Sorger, V. J.; Genov, D. A.; Pile, D. F. P.; Zhang, X. (2008-07-11). "A hybrid plasmonic waveguide for subwavelength confinement and long-range propagation". Nature Photonics. 2 (8): 496–500. Bibcode:2008NaPho...2.....O. doi:10.1038/nphoton.2008.131. hdl:10044/1/19117.
  35. ^ Alam, Muhammad Z.; Aitchison, J. Stewart; Mojahedi, Mo (2014-02-19). "A marriage of convenience: Hybridization of surface plasmon and dielectric waveguide modes". Laser & Photonics Reviews. 8 (3): 394–408. Bibcode:2014LPRv....8..394A. doi:10.1002/lpor.201300168. S2CID 54036931.
  36. ^ Krenn, J. R.; Weeber, J.-C. (2004-04-15). Richards, David; Zayats, Anatoly (eds.). "Surface plasmon polaritons in metal stripes and wires". Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences. 362 (1817): 739–756. doi:10.1098/rsta.2003.1344. PMID 15306491. S2CID 6870662.
  37. ^ González, M. U.; Weeber, J.-C.; Baudrion, A.-L.; Dereux, A.; Stepanov, A. L.; Krenn, J. R.; Devaux, E.; Ebbesen, T. W. (2006-04-13). "Design, near-field characterization, and modeling of 45° surface-plasmon Bragg mirrors". Physical Review B. 73 (15): 155416. Bibcode:2006PhRvB..73o5416G. doi:10.1103/physrevb.73.155416.
  38. ^ Pacifici, Domenico; Lezec, Henri J.; Atwater, Harry A. (2007). "All-optical modulation by plasmonic excitation of CdSe quantum dots". Nature Photonics. 1 (7): 402–406. Bibcode:2007NaPho...1..402P. doi:10.1038/nphoton.2007.95.
  39. ^ Wu, Zhi; Nelson, Robert L.; Haus, Joseph W.; Zhan, Qiwen (2008-03-05). "Plasmonic electro-optic modulator design using a resonant metal grating". Optics Letters. 33 (6): 551–3. Bibcode:2008OptL...33..551W. doi:10.1364/ol.33.000551. PMID 18347706.
  40. ^ Nikolajsen, Thomas; Leosson, Kristjan; Bozhevolnyi, Sergey I. (2004-12-13). "Surface plasmon polariton based modulators and switches operating at telecom wavelengths". Applied Physics Letters. 85 (24): 5833–5835. Bibcode:2004ApPhL..85.5833N. doi:10.1063/1.1835997.
  41. ^ Stockman, Mark I. (2008). "Spasers explained". Nature Photonics. 2 (6): 327–329. Bibcode:2008NaPho...2..327S. doi:10.1038/nphoton.2008.85.
  42. ^ Volkov, Valentyn S.; Bozhevolnyi, Sergey I.; Devaux, Eloïse; Ebbesen, Thomas W. (2006). "Compact gradual bends for channel plasmon polaritons". Optics Express. 14 (10): 4494–503. Bibcode:2006OExpr..14.4494V. doi:10.1364/oe.14.004494. PMID 19516603.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Plasmonics&oldid=1217534935"