Slug flow
From Wikipedia the free encyclopedia
In fluid mechanics, slug flow in liquid–gas two-phase flow is a type of flow pattern. Lighter, faster moving continuous fluid which contains gas bubbles - pushes along a disperse gas bubble.[1][2] Pressure oscillations within piping can be caused by slug flow.[3] The word slug usually refers to the heavier, slower moving fluid, but can also be used to refer to the bubbles of the lighter fluid.
This flow is characterised by the intermittent sequence of liquid slugs followed by longer gas bubbles flowing through a pipe. The flow regime is similar to plug flow, but the bubbles are larger and move at a greater velocity.
Examples
[edit]- Production of hydrocarbon in wells and their transportation in pipelines;.
- Production of steam and water in geothermal power plants.
- Boiling and condensation in liquid-vapor systems of thermal power plants;
- Emergency core cooling of nuclear reactors.
- Heat and mass transfer between gas and liquid in chemical reactors.[4]
See also
[edit]References
[edit]- ^ Bai, Yong; Bai, Qiang (2005). Subsea Pipelines and Risers. Elsevier. p. 298. ISBN 9780080445663.
- ^ Fabre, J.; A. Line (2006). "Slug Flow". Thermopedia. S. doi:10.1615/AtoZ.s.slug_flow.
- ^ McKetta, John J. Jr. (1992). Piping Design Handbook. CRC Press. ISBN 9780824785703.
- ^ Fabre, J. (1994). "Advancements in Two-Phase Slug Flow Modeling". University of Tulsa Centennial Petroleum Engineering Symposium. Society of Petroleum Engineers. doi:10.2118/27961-ms.
 | This fluid dynamics–related article is a stub. You can help Wikipedia by expanding it. |