Trans-Harbour line (Mumbai Suburban Railway)

Trans-Harbour line
Overview
Status	Operational
Owner	Indian Railways
Locale	Navi Mumbai, Maharashtra Thane, Maharashtra
Termini	Thane Vashi, Panvel
Stations	16
Service
Type	Suburban rail
System	Mumbai Suburban Railway
Services	List Thane–Vashi Thane–Nerul Thane–Belapur Thane–Panvel
Operator(s)	Central Railways (CR)
Depot(s)	Sanpada, Kalwa
Rolling stock	Jessop, Siemens
History
Opened	1993; 31 years ago (1993) (for goods) 9 November 2004; 20 years ago (2004-11-09) (for passengers)
Technical
Line length	38 km (24 mi)
Track gauge	5 ft 6 in (1,676 mm) broad gauge
Route map Legend Central line to Diva Junction Thane Creek Thane Central line to Mumbai CSMT Digha Gaon Airoli Rabale Ghansoli Koparkhairane Turbhe Harbour line Sanpada Vashi Harbour line to Mumbai CSMT Juinagar Nerul Seawoods–Darave  Nerul–Uran line CBD Belapur Kharghar Mansarovar Khandeshwar Panvel

The Trans-Harbour line is a branch of the Mumbai Suburban Railway's Harbour line that connects Navi Mumbai and Thane and is operated by the Central Railway. Its termini include Thane, Vashi, and Panvel on the Thane–Vashi and Thane–Panvel routes. Thane is the common terminus for both the routes.

This line is a double track and does not have any fast trains. It starts from separate platforms (numbers 9 and 10) located at the far east in Thane and runs parallel to the Main line, crossing over Thane Creek until just before the Parsik Tunnel. Here, the line turns southwards and continues until Koparkhairane. At Turbhe, the line branches into two, both running parallel to the Harbour line. The first line joins at Sanpada and terminates at Vashi, while the second line joins at Juinagar and terminates at Panvel.

The stations on the Navi Mumbai side of the Trans-Harbour line were designed by CIDCO. Some IT, corporate, and commercial offices, along with shopping malls, are located above some of these railway stations.

As of December 2021, 252 services operate on the Trans-Harbour line in both directions.^[1] A total of 12 EMU Rakes ply on this line.

The City and Industrial Development Corporation of Maharashtra (CIDCO) was appointed as the new town development authority in 1970. The government acquired land from 95 villages and handed it over to CIDCO for the development of towns. To decongest Mumbai, CIDCO developed 14 nodes in Navi Mumbai. The development of Navi Mumbai International Airport and six railway corridors in Navi Mumbai was meant to increase connectivity between towns, nodes, and mega establishments. The major features of the rail corridors include direct access from residential areas to railway stations by foot, convenient interchange facilities from one corridor to another, double discharge platforms at every station, easy-to-follow routes, and comfortable and pleasant journeys, forming key features of the commuter railway system in Navi Mumbai.

The line was exclusively for freight from 1993 until 2004 when passenger services commenced.^[2] It was formally inaugurated on 9 November 2004 by Railway Minister Lalu Prasad Yadav.^[3]

On 19 January 2013, the conversion of all ten rakes on the Trans-Harbour line into 12-car trains was completed.^[4]

The fourth air-conditioned rake of the Mumbai Suburban Railway and the first of the Central Railway was commissioned on January 30, 2020 to serve the Trans-Harbour line.^[5] However, in January 2022, the Central Railway ceased operating the only air-conditioned train on the line, citing a poor response from commuters due to low frequency and exorbitant fares.^[6]

• Mumbai Suburban Railway
• List of Mumbai Suburban Railway stations
• Nerul–Uran line (Mumbai Suburban Railway)
• Central line (Mumbai Suburban Railway)

This Indian rail transport related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e