GWR 2251 Class

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "GWR 2251 Class" – news · newspapers · books · scholar · JSTOR (December 2014)

GWR 2251 Class
2242 at Tramway Junction, Gloucester in 1962
Type and origin Power type Steam Designer Charles Collett Builder GWR Swindon Works Order number Lots 261, 283, 298, 312, 322, 337, 347, 360 Build date 1930–1948 Total produced 120
Specifications Configuration: ​  • Whyte 0-6-0  • UIC C h2 Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 5 ft 2 in (1.575 m) Minimum curve 4+1⁄2 chains (297 ft; 91 m) normal, 4 chains (264 ft; 80 m) slow Length 53 ft 8+1⁄4 in (16.36 m) Width 8 ft 5 in (2.565 m) Height 12 ft 8+7⁄16 in (3.872 m) Axle load 15 long tons 15 cwt (35,300 lb or 16 t) (17.6 short tons) full Loco weight 43 long tons 8 cwt (97,200 lb or 44.1 t) (48.6 short tons) full Tender weight 36 long tons 15 cwt (82,300 lb or 37.3 t) (41.2 short tons) full Fuel type Coal Fuel capacity 5 long tons 0 cwt (11,200 lb or 5.1 t) (5.6 short tons) Water cap. 3,000 imp gal (14,000 L; 3,600 US gal) Firebox: ​  • Grate area 17.40 sq ft (1.617 m2) Boiler GWR Standard No. 10[1] Boiler pressure 200 lbf/in2 (1.38 MPa) Heating surface: ​  • Firebox 102 sq ft (9.5 m2)/  • Tubes 1,069 sq ft (99.3 m2) Superheater: ​  • Type 4-element or 6-element  • Heating area 4-element: 52.98 sq ft (4.922 m2), 6-element: 70.00 sq ft (6.503 m2) Cylinders Two, inside Cylinder size 17+1⁄2 in × 24 in (444 mm × 610 mm)
Performance figures Tractive effort 20,155 lbf (89.65 kN)
Career Operators GWR » BR Power class GWR: B, BR: 3MT Numbers 2251–2299, 2200–2250, 3200–3219 Axle load class Yellow Withdrawn 1958–1965 Disposition One preserved, remainder scrapped

The Great Western Railway (GWR) 2251 Class or Collett Goods Class was a class of 0-6-0 steam tender locomotives designed for medium-powered freight. They were introduced in 1930 as a replacement for the earlier Dean Goods 0-6-0s and were built up to 1948.^[2]

In many ways, the 2251s were modernised Dean Goods, sharing the main dimensions, but having more modern features such as taper boilers and full cabs. Increases in both boiler pressure and heating surface gave a useful increase in power at the expense of weight that restricted permitted routes. Numbers 2211–2230, built in 1940 did not have side windows. Designed by Charles Collett for medium freight and passenger duties they had 5 ft 2 in (1.575 m) driving wheels. Carrying a maximum of 3,000 imperial gallons (14,000 L; 3,600 US gal) of water for a boiler operating at 200 psi (1.4 MPa), they developed 20,155 lbf (89.65 kN) of tractive effort. They could be found operating on most parts of the former GWR system. These were the first GWR 0-6-0 to use the standard number 10 boiler as later fitted to the 94xx, 15xx and various rebuilds of absorbed mainly Welsh locomotives.

No. 3217, delivered December 1947, was the last locomotive built by the GWR. Nos. 3218 and 3219 were delivered in January 1948, the first locomotives built at Swindon for British Railways.^[4]

They were withdrawn between 1958 and 1965.

One, 3205, has been preserved and is located on the South Devon Railway in Devon.^[5] While the engine has spent most of its preserved life running on heritage railways including the Severn Valley Railway, West Somerset Railway & then the Dart Valley Railway (before renaming to the SDR). For a very brief one-off appearance the engine made a mainline appearance at the Rocket 150 celebrations in 1980. The engine arrived at the event and then later departed for home under its own power.

As of 2022 the engine is stored awaiting an overhaul following early withdrawal in 2017, the ticket having expired in 2020.

Bachmann Branchline manufactures models of the 2251 in OO gauge. Mainline (Palitoy) released the first ready-to-run OO model in 1978. The Bachmann model was released in 1996. It is based on the Mainline model with revised body tooling to complement a completely new chassis design that allows the boiler backhead to be modelled.

In British N gauge, the first model was the Langley whitemetal kit, designed to fit the Graham Farish 94xx/general purpose tank chassis. The next was the Peco ready-to-run model, introduced in 2007. This was a big step forward, and had DCC fitted as standard.^[6] Production of these stopped around 2010. The next model of the class was made by Union Mills, released in 2017.

In 3mm/TT scale, BEC produced a whitemetal kit body for the Tri-ang LMS Fowler Class 3F chassis, though this is long discontinued.

Wikimedia Commons has media related to GWR 2251 Class.

• Great Western Archive – Introduction to 2251 Class
• Great Western Archive – Shed allocations, build and withdrawal dates
• Class 2251 Details at Rail UK
• Heritage Railways Loco Database – entry for no. 3205