LCR 29

LCR No.29
No.29 sitting at Grosmont station in 2006
Type and origin Power type Steam Builder Kitson and Company Serial number 4263 Build date 1904
Specifications Configuration: ​  • Whyte 0-6-2T  • UIC C'1ht Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 4 ft 6 in (1.37 m) Loco weight 60 t (59 long tons; 66 short tons) Fuel type Coal Boiler pressure 165 psi (1,140 kPa) Cylinders Two, inside Cylinder size 19 in × 26 in (480 mm × 660 mm) Valve gear Allan (straight link) Valve type Slide valves
Performance figures Tractive effort 23,500 lbf (105,000 N)
Career Operators Lambton Collieries Lambton Railway National Coal Board North Yorkshire Moors Railway Numbers LH&JC NCB 29 NYMR 29 First run 1904 Withdrawn February 1969 Restored June 1970 Current owner North Yorkshire Moors Railway Disposition Operational

Lambton Colliery Railway No.29 is a preserved 0-6-2 tank locomotive built by Kitson and Company for the Lambton Colliery network in 1904. It was the first 0-6-2T to be employed on that system, and it was later joined by No.5. No.29 was designed to work between Philadelphia and Sunderland. In February 1969, No.29 was withdrawn from service and placed into dead storage. The following year, the locomotive was purchased by volunteers from the North Yorkshire Moors Railway, and it was restored to working order. As of 2023, the locomotive remains operational on the NYMR.

The Lambton Colliery was a privately owned colliery, in County Durham, England.^[1] In the early 1900s, the company had a need for larger and more powerful locomotives than their existing 0-6-0 tender locomotives from the 1850s. In 1904, they approached Kitson and Company in Leeds, West Yorkshire, and they bought their first 0-6-2 tank locomotive, which was No.29. 0-6-2 tank locomotives were previously introduced and proven their worth in hauling coal loads. With a tractive force of 23,500 pounds, as well as a boiler pressure of 165 pounds per square inch, the LCR decided to purchase two identical locomotives to No.29 for their roster in 1907, Nos 30 and 31. In 1909, two more 0-6-2s were bought by the LCR, Nos.5 and 10, but this time, by Robert Stephenson and Company with a slightly different design.^[2] Two more 0-6-2s followed for the railway in 1920 and 1934, Nos.42 and 57. Some Ex Taff Vale Great Western Railway 0-6-2s would also soon follow.

No.29 and its classmates were used for shunting and pulling wagon loads of coal on LCR's rail lines, particularly between the pitheads near Philadelphia and the quayside coal staithes at Sunderland. In the late 1950s, (Under the ownership of the National Coal Board (NCB)) the Durham Coal field was being wound down, and a further spate of closures occurred in 1967 with Lambton Staithes being closed in January and the line to Pallion closing in August of the same year. The following year, the NCB was making steps to transition to diesel power, thus making the steam locomotives redundant even in the smaller railways of the country. In spite of an overhaul being completed in October 1968, No.29 was withdrawn only three months later on 15 February 1969, and it was placed into storage in Philadelphia shortly thereafter.

In January 1970 three volunteers went to Philadelphia to examine Nos.5 and 29 with a view to purchase them. All the other withdrawn locomotives remained inside Philadelphia Works. During May, they were informed that their bids for Nos.5 and 29 had been successful, so they commenced preparing them for their journey to the North Yorkshire Moors Railway.^[3] The initial plan was that the locomotive would be hauled by BR Class 46 diesel locomotive No.D186. However, the steam locomotive was allowed to haul the train to Thornaby, and when it arrived there, No.29 was fitted with a London, Midland and Scottish-style vacuum braking system from an LMS Class 5 4-6-0, and the left leading axlebox was re-metalled. Then, BR Class 37 No.D6899 hauled No.29, along with LNER Q6 No.63395, from Thornaby to the NYMR's main location in Grosmont. Under NYMR's ownership, No.29 has been restored to working order, and since the railway's reopening on 1 May 1973, it has been hauling rail tours on their rails, and over time, it was rotated in and out of service.^[4] It was also given the name Peggy.^[5] Having returned to steam after another overhaul for the 40th Anniversary of the NYMR in 2013, No.29 has been in frequent use until October 2014, when a crack was discovered in her cylinder block, and it was withdrawn to wait for a replacement block. Another overhaul was completed in July 2019 for the Annual Steam Gala. In July 2021, No.29 made an appearance at the Didcot Railway Centre in Didcot, Oxfordshire for that year's Diamond Jubilee Gala to celebrate the Great Western Society's 60th anniversary.^[6] It is still available for traffic as of 2023.^[7] It carries the LH&JC initials of the Lambton, Hetton and Joicey Colliery system, formed by various amalgamations in 1924.

• 0-6-2
• Taff Vale Railway O1 class
• Taff Vale Railway O2 class
• List of preserved British industrial steam locomotives

Wikimedia Commons has media related to Lambton Collieries 29.

• North Yorkshire Moors Railway website