Obusier de 155 mm C modèle 1890

Obusier de 155 mm C modèle 1890
Type	Howitzer Siege gun
Place of origin	France
Service history
In service	1890-1918
Wars	World War I
Production history
Designed	1890
Produced	1890
No. built	134
Specifications
Mass	Combat: 3,315 kg (7,308 lb) Travel: 3,865 kg (8,521 lb)
Barrel length	2.4 m (7 ft 10 in) L/15.5
Crew	5[1]
Shell	Separate loading bagged charges and projectiles
Shell weight	40–43.7 kg (88–96 lb)
Caliber	155 mm (6.1 in)[1]
Breech	de Bange
Recoil	Hydro-pneumatic
Carriage	Box trail
Elevation	-5° to +65°
Traverse	16°[1]
Rate of fire	1.5 rpm
Muzzle velocity	303 m/s (990 ft/s)
Effective firing range	6.3 km (4 mi)
Maximum firing range	7.7 km (5 mi)[1]

The Obusier de 155 mm C modèle 1890 - was a French howitzer designed by Captain Louis Henry Auguste Baquet and employed by the French army during the First World War. It was one of the first modern howitzers equipped with a recoil system.

Development of the mle 1890 began in 1886 at the Atelier-de-précision in Paris, following a request by the French Army for a mobile heavy howitzer capable of high angle fire.

The mle 1890 is a transitional piece and was a combination of both old and new ideas. It was a breech loaded howitzer with a steel barrel and a de Bange obturator designed by Colonel Charles Ragon de Bange which used separate loading bagged charges and projectiles. The barrel was the same as used on the earlier Obusier de 155 mm C modele 1881 siege gun. The steel box trail carriage had two wooden spoked wheels with steel rims and was designed to be light enough to be horse-drawn in one piece. The carriage was split into two parts, a stationary lower part which supported the weapon and a sliding upper part which supported the gun barrel. The barrel was inserted into a cradle with a hydro-pneumatic recoil system below the barrel which connected to the lower portion of the carriage.^[1]

The cradle and carriage had a hollow center section to allow for high angles of elevation, while the front of the cradle pivoted to allow limited traverse. When the gun fired the cradle recoiled backward, while the lower part stayed anchored. This style of carriage and recoil system was also used by the less powerful Obusier de 120 mm C modèle 1890. The recoil mechanism was not enough to absorb the barrels recoil forces and this made the piece unstable at firing. This style of carriage and recoil system did not find wider acceptance due to its insufficient performance.^[2]

Although the majority of combatants had heavy field artillery prior to the outbreak of the First World War, none had adequate numbers of heavy guns in service, nor had they foreseen the growing importance of heavy artillery once the Western Front stagnated and trench warfare set in. Fortresses, armories, coastal fortifications, and museums were scoured for heavy artillery and sent to the front. Suitable field and rail carriages were built for these guns in an effort to give their forces the heavy field artillery needed to overcome trenches and hardened concrete fortifications.^[3]

In August 1914, 134 mle 1890s were assigned to régiments d'artillerie lourde de campagne (heavy field artillery regiments) and régiments d'artillerie à pied (fortress artillery regiments) in forts of the Séré de Rivières.^[4]

The mle 1881 used separate loading bagged charges and projectiles. The charges were in cloth bags and the weight of propellant could be varied from .6–2.8 kg (1 lb 5 oz – 6 lb 3 oz) to vary range and velocity.^[2]