RF CMOS

Die shot of a Broadcom BCM2050KMLG, an RF CMOS chip used as a WiFi 802.11g transceiver.[1] Notice the octagon-like, spiral-like structures, which can act as inductors[2] transformers and baluns.[3][4][5]
Die shot of a Marvell 88W8010 WiFi 802.11g transceiver. It has both octagon-like and square-like, spiral-like structures that can also be used as inductors.[6]

RF CMOS is a metal–oxide–semiconductor (MOS) integrated circuit (IC) technology that integrates radio-frequency (RF), analog and digital electronics on a mixed-signal CMOS (complementary MOS) RF circuit chip.[7][8] It is widely used in modern wireless telecommunications, such as cellular networks, Bluetooth, Wi-Fi, GPS receivers, broadcasting, vehicular communication systems, and the radio transceivers in all modern mobile phones and wireless networking devices. RF CMOS technology was pioneered by Pakistani engineer Asad Ali Abidi at UCLA during the late 1980s to early 1990s, and helped bring about the wireless revolution with the introduction of digital signal processing in wireless communications. The development and design of RF CMOS devices was enabled by van der Ziel's FET RF noise model, which was published in the early 1960s and remained largely forgotten until the 1990s.[9][10] [11][12]

History

[edit]
Asad Ali Abidi developed RF CMOS technology at UCLA during the late 1980s to early 1990s.

Pakistani engineer Asad Ali Abidi, while working at Bell Labs and then UCLA during the 1980s–1990s, pioneered radio research in metal–oxide–semiconductor (MOS) technology and made seminal contributions to radio architecture based on complementary MOS (CMOS) switched-capacitor (SC) technology.[13] In the early 1980s, while working at Bell, he worked on the development of sub-micron MOSFET (MOS field-effect transistor) VLSI (very large-scale integration) technology, and demonstrated the potential of sub-micron NMOS integrated circuit (IC) technology in high-speed communication circuits. Abidi's work was initially met with skepticism from proponents of GaAs and bipolar junction transistors, the dominant technologies for high-speed communication circuits at the time. In 1985 he joined the University of California, Los Angeles (UCLA), where he pioneered RF CMOS technology during the late 1980s to early 1990s. His work changed the way in which RF circuits would be designed, away from discrete bipolar transistors and towards CMOS integrated circuits.[14]

Abidi was researching analog CMOS circuits for signal processing and communications at UCLA during the late 1980s to early 1990s.[14] Abidi, along with UCLA colleagues J. Chang and Michael Gaitan, demonstrated the first RF CMOS amplifier in 1993.[15][16] In 1995, Abidi used CMOS switched-capacitor technology to demonstrate the first direct-conversion transceivers for digital communications.[13] In the late 1990s, RF CMOS technology was widely adopted in wireless networking, as mobile phones began entering widespread use.[14] This changed the way in which RF circuits were designed, leading to the replacement of discrete bipolar transistors with CMOS integrated circuits in radio transceivers.[14]

There was a rapid growth of the telecommunications industry towards the end of the 20th century, primarily due to the introduction of digital signal processing in wireless communications, driven by the development of low-cost, very large-scale integration (VLSI) RF CMOS technology.[17] It enabled sophisticated, low-cost and portable end-user terminals, and gave rise to small, low-cost, low-power and portable units for a wide range of wireless communication systems. This enabled "anytime, anywhere" communication and helped bring about the wireless revolution, leading to the rapid growth of the wireless industry.[18]

In the early 2000s, RF CMOS chips with deep sub-micron MOSFETs capable of over 100 GHz frequency range were demonstrated.[19] As of 2008, the radio transceivers in all wireless networking devices and modern mobile phones are mass-produced as RF CMOS devices.[14]

Applications

[edit]
The ESP32 is an example of a chip combining RF CMOS with digital logic, which in this case is one or two processor cores that are hidden.

The baseband processors[20][21] and radio transceivers in all modern wireless networking devices and mobile phones are mass-produced using RF CMOS devices.[14] RF CMOS circuits are widely used to transmit and receive wireless signals, in a variety of applications, such as satellite technology (including GPS and GPS receivers), Bluetooth, Wi-Fi, near-field communication (NFC), mobile networks (such as 3G and 4G), terrestrial broadcast, and automotive radar applications, among other uses.[22]

Examples of commercial RF CMOS chips include Intel's DECT cordless phone, and 802.11 (Wi-Fi) chips created by Atheros and other companies.[23] Commercial RF CMOS products are also used for Bluetooth and Wireless LAN (WLAN) networks.[24] RF CMOS is also used in the radio transceivers for wireless standards such as GSM, Wi-Fi, and Bluetooth, transceivers for mobile networks such as 3G, and remote units in wireless sensor networks (WSN).[25]

RF CMOS technology is crucial to modern wireless communications, including wireless networks and mobile communication devices. One of the companies that commercialized RF CMOS technology was Infineon. Its bulk CMOS RF switches sell over 1 billion units annually, reaching a cumulative 5 billion units, as of 2018.[26]

Practical software-defined radio (SDR) for commercial use was enabled by RF CMOS, which is capable of implementing an entire software-defined radio system on a single MOS IC chip.[27][28][29] RF CMOS began to be used for SDR implementations during the 2000s.[28]

Common applications

[edit]

RF CMOS is widely used in a number of common applications, which include the following.

See also

[edit]

References

[edit]
  1. ^ https://www.datasheetbank.com/en/pdf-view/BCM2050-Broadcom [bare URL]
  2. ^ Seong-Kyun Kim; Byung-Sung Kim (2008). "Scalable modeling of spiral inductor in 0.13μm RF CMOS process". 2008 International SoC Design Conference. doi:10.1109/SOCDC.2008.4815667. ISBN 978-1-4244-2598-3. S2CID 27842573.
  3. ^ "On Chip Transformer Design for CMOS Power Amplifiers". 2010. S2CID 195748866.
  4. ^ Han, Jiang-An; Kong, Zhi-Hui; Ma, Kai-Xue; Yeo, Kiat-Seng (2014). "CMOS 1:1 Transformer design for millimeter wave application". 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS). pp. 1–4. doi:10.1109/URSIGASS.2014.6929414. ISBN 978-1-4673-5225-3. S2CID 26756764.
  5. ^ Liwen Jing; Li, Alvin; Duona Luo; Rowell, Corbett R.; Yue, C. Patrick (2015). "Millimeter-wave 4∶1 Transformer-based balun design for CMOS RF IC's". 2015 IEEE International Wireless Symposium (IWS 2015). pp. 1–4. doi:10.1109/IEEE-IWS.2015.7164519. ISBN 978-1-4799-1928-4. S2CID 38084098.
  6. ^ High-Linearity CMOS RF Front-End Circuits. Springer. 8 February 2006. ISBN 978-0-387-23802-9.
  7. ^ "Figure 1 Summary of SiGe BiCMOS and rf CMOS technology". ResearchGate. Retrieved 2019-12-07.
  8. ^ RF CMOS Power Amplifiers: Theory, Design and Implementation. The International Series in Engineering and Computer Science. Vol. 659. Springer Science+Business Media. 2002. doi:10.1007/b117692. ISBN 0-7923-7628-5.
  9. ^ A. van der Ziel (1962). "Thermal noise in field effect transistors". Proceedings of the IRE. 50 (8): 1808–1812. doi:10.1109/JRPROC.1962.288221.
  10. ^ A. van der Ziel (1963). "Gate noise in field effect transistors at moderately high frequencies". Proceedings of the IEEE. 51 (3): 461–467. doi:10.1109/PROC.1963.1849.
  11. ^ A. van der Ziel (1986). Noise in Solid State Devices and Circuits. Wiley-Interscience.
  12. ^ T.M. Lee (2007). "The history and future of RF CMOS: From oxymoron to mainstream" (PDF). IEEE Int. Conf. Computer Design.
  13. ^ a b Allstot, David J. (2016). "Switched Capacitor Filters" (PDF). In Maloberti, Franco; Davies, Anthony C. (eds.). A Short History of Circuits and Systems: From Green, Mobile, Pervasive Networking to Big Data Computing. IEEE Circuits and Systems Society. pp. 105–110. ISBN 9788793609860. Archived from the original (PDF) on 2021-09-30. Retrieved 2019-12-07.
  14. ^ a b c d e f g h i j k l m n O'Neill, A. (2008). "Asad Abidi Recognized for Work in RF-CMOS". IEEE Solid-State Circuits Society Newsletter. 13 (1): 57–58. doi:10.1109/N-SSC.2008.4785694. ISSN 1098-4232.
  15. ^ a b c d e f g h i j Abidi, Asad Ali (April 2004). "RF CMOS comes of age". IEEE Journal of Solid-State Circuits. 39 (4): 549–561. Bibcode:2004IJSSC..39..549A. doi:10.1109/JSSC.2004.825247. ISSN 1558-173X. S2CID 23186298.
  16. ^ Chang, J.; Abidi, Asad Ali; Gaitan, Michael (May 1993). "Large suspended inductors on silicon and their use in a 2- mu m CMOS RF amplifier". IEEE Electron Device Letters. 14 (5): 246–248. Bibcode:1993IEDL...14..246C. doi:10.1109/55.215182. ISSN 1558-0563. S2CID 27249864.
  17. ^ Srivastava, Viranjay M.; Singh, Ghanshyam (2013). MOSFET Technologies for Double-Pole Four-Throw Radio-Frequency Switch. Springer Science & Business Media. p. 1. ISBN 9783319011653.
  18. ^ Daneshrad, Babal; Eltawil, Ahmed M. (2002). "Integrated Circuit Technologies for Wireless Communications". Wireless Multimedia Network Technologies. The International Series in Engineering and Computer Science. 524. Springer US: 227–244. doi:10.1007/0-306-47330-5_13. ISBN 0-7923-8633-7.
  19. ^ Chen, Chih-Hung; Deen, M. Jamal (2001). "RF CMOS Noise Characterization And Modeling". International Journal of High Speed Electronics and Systems. 11 (4). World Scientific Publishing Company: 1085–1157 (1085). doi:10.1142/9789812777768_0004. ISBN 9810249055.
  20. ^ a b Chen, Wai-Kai (2018). The VLSI Handbook. CRC Press. pp. 60–2. ISBN 9781420005967.
  21. ^ a b Morgado, Alonso; Río, Rocío del; Rosa, José M. de la (2011). Nanometer CMOS Sigma-Delta Modulators for Software Defined Radio. Springer Science & Business Media. p. 1. ISBN 9781461400370.
  22. ^ a b c d e f g h i j k Veendrick, Harry J. M. (2017). Nanometer CMOS ICs: From Basics to ASICs. Springer. p. 243. ISBN 9783319475974.
  23. ^ a b c Nathawad, L.; Zargari, M.; Samavati, H.; Mehta, S.; Kheirkhaki, A.; Chen, P.; Gong, K.; Vakili-Amini, B.; Hwang, J.; Chen, M.; Terrovitis, M.; Kaczynski, B.; Limotyrakis, S.; Mack, M.; Gan, H.; Lee, M.; Abdollahi-Alibeik, B.; Baytekin, B.; Onodera, K.; Mendis, S.; Chang, A.; Jen, S.; Su, D.; Wooley, B. "20.2: A Dual-band CMOS MIMO Radio SoC for IEEE 802.11n Wireless LAN" (PDF). IEEE Entity Web Hosting. IEEE. Archived from the original (PDF) on 23 October 2016. Retrieved 22 October 2016.
  24. ^ a b c Olstein, Katherine (Spring 2008). "Abidi Receives IEEE Pederson Award at ISSCC 2008" (PDF). SSCC: IEEE Solid-State Circuits Society News. 13 (2): 12. doi:10.1109/HICSS.1997.665459. S2CID 30558989. Archived from the original (PDF) on 2019-11-07.
  25. ^ a b c d e f Oliveira, Joao; Goes, João (2012). Parametric Analog Signal Amplification Applied to Nanoscale CMOS Technologies. Springer Science & Business Media. p. 7. ISBN 9781461416708.
  26. ^ "Infineon Hits Bulk-CMOS RF Switch Milestone". EE Times. 20 November 2018. Retrieved 26 October 2019.
  27. ^ a b c d Morgado, Alonso; Río, Rocío del; Rosa, José M. de la (2011). Nanometer CMOS Sigma-Delta Modulators for Software Defined Radio. Springer Science & Business Media. ISBN 9781461400370.
  28. ^ a b c d Leenaerts, Domine (May 2010). Wide band RF CMOS circuit design techniques (PDF). IEEE Solid-State Circuits Society Distinguished Lecturers Program (SSCS DLP). NXP Semiconductors. Retrieved 10 December 2019.
  29. ^ a b c d e "Software-defined-radio Technology". NXP Semiconductors. Retrieved 11 December 2019.
  30. ^ a b c d e f g h i j "TEF810X Fully-Integrated 77 GHz Radar Transceiver". NXP Semiconductors. Retrieved 16 December 2019.
  31. ^ a b c d e f g h i j k l m n "RF CMOS". GlobalFoundries. 20 October 2016. Retrieved 7 December 2019.
  32. ^ a b c d e f g h i j k l "Radar Transceivers". NXP Semiconductors. Retrieved 16 December 2019.
  33. ^ a b c "TEF810X: 77GHz Automotive Radar Transceiver" (PDF). NXP Semiconductors. Retrieved 20 December 2019.
  34. ^ a b c d e "TEF810X: 76 GHz to 81 GHz car RADAR transceiver" (PDF). NXP Semiconductors. Retrieved 20 December 2019.
  35. ^ a b Kim, Woonyun (2015). "CMOS power amplifier design for cellular applications: an EDGE/GSM dual-mode quad-band PA in 0.18 μm CMOS". In Wang, Hua; Sengupta, Kaushik (eds.). RF and mm-Wave Power Generation in Silicon. Academic Press. pp. 89–90. ISBN 978-0-12-409522-9.