M197 electric cannon

This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (September 2010) (Learn how and when to remove this message)

M197 Gatling gun
Type	Rotary cannon
Place of origin	United States
Service history
In service	1967–present
Used by	United States Marine Corps
Production history
Designer	General Dynamics
Manufacturer	General Dynamics Armament Systems
Specifications
Mass	132 pounds (60 kg)
Length	1,828 millimetres (72.0 in)
Barrel length	1,524 millimetres (60.0 in)
Cartridge	20×102mm
Caliber	20 mm
Barrels	3-barrel (progressive RH parabolic twist, 9 grooves)
Rate of fire	750-1500 rpm[1]
Muzzle velocity	1,030 metres per second (3,400 ft/s)

The M197 electric cannon is a 20 mm three-barreled electric Gatling-type rotary cannon used by the United States military.

The M197 electric cannon was developed primarily for use by United States Army helicopter gunships. Development began in 1967 after experience in the Vietnam War revealed the inadequacy of the 7.62 mm Minigun for gunship use. The M197 is essentially a lightened version of the General Electric M61 Vulcan cannon, with three barrels instead of six. Its maximum rate of fire is one quarter that of the Vulcan, largely to limit its recoil for light aircraft and helicopter use. It shares the Vulcan's M50 and PGU series 20 mm ammunition.

The M197 went into service on later marks of the AH-1 Cobra, using either the M97 or A/A49E-7 armament subsystems, and was also fitted in a ventral turret on the U.S. Marine Corps YOV-10D Bronco NOGS. It is also the basis of the GPU-2/A gun pod, which incorporates the cannon, a battery and electric drive motor, and 300 rounds of linkless ammunition.

In the Cobra, the weapon is supplied with a magazine of 700 linked rounds, with a total capacity including feeder system of 750 rounds. It has a cyclic rate of fire of 730+-50 rounds per minute. Standard practice is to fire the cannon in 30- to 50-round bursts. With extended automatic firing from a hover, the recoil is sufficient that the application of forward cyclic to maintain one's position over the ground is inadequate.

The M197 remains in use in the latest AH-1W Cobra and AH-1Z Viper gunships. Although the weapon's rotary drive is theoretically quite reliable, its ammunition feed has been anything but: Marine pilots initially reported an alarmingly high jam rate (sometimes greater than 30%).^{[citation needed]} The USMC and the manufacturer are aware of the problem and in 2011 a linkless feed system developed by Meggit Defense Systems was incorporated into the AH-1W and the Zulus.^{[citation needed]} The system is capable of holding 650 +/-3 rounds in the storage unit with approximately 40 rounds in the feed chute.

The M197 is also mounted as a chin turret in Italy's Agusta A129 Mangusta CBT helicopter, with a capacity of 500 rounds.^[2]

The M197 is also mounted as a chin turret in South Korea's KAI LAH helicopter.

The M197 was also mounted into the AU-23A as a handheld Door gun.

The XM301 was an improved M197 intended to be the gun on the later canceled RAH-66 Comanche.

The weapon's current contractor is General Dynamics Armament Systems.

Iran has claimed downing one Iraqi MiG-21 fighter on 14 February 1986 during the Iran–Iraq War using the M197 gun turret installed on its AH-1J Internationals. The cannon was also used during the "dogfights" between Iranian AH-1Js and Iraqi helicopters (usually Mi-24s and Gazelles).

• M61 Vulcan
• XM301
• M621 cannon—20×102mm gun mounted in helicopters as a chin turret

Notes

Online