Pennsylvania Railroad class D4

PRR D4
Type and origin
Power typeSteam
BuilderPRR Altoona shops
Build date1873–1890
Total produced37
Specifications
Configuration:
 • Whyte4-4-0
 • UIC2′B
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.28 in (711 mm)[1]
Driver dia.62 in (1,575 mm)[1]
Wheelbase22 ft 5+58 in (6.848 m) (locomotive); 46 ft 10+18 in (14.278 m) (locomotive and tender)[1]
Length56 ft 3.94 in (17.1689 m)[1]
Height14 ft 5.96 in (4.4186 m)[1]
Adhesive weight56,200 lb (25.5 tonnes)[1]
Loco weight81,800 lb (37.1 tonnes)[1]
Tender weight51,400 lb (23.3 tonnes)[1]
Total weight133,200 lb (60.4 tonnes)[1]
Tender type8-wheel with water scoop
Fuel typeAnthracite coal
Fuel capacity12,000 lb (5.4 tonnes)[1]
Water cap.2,400 US gal (9,100 L; 2,000 imp gal)[1]

The Pennsylvania Railroad's steam locomotive class D4 (formerly Class C (anthracite), pre-1895) comprised thirty-seven anthracite-burning 4-4-0 locomotives intended for general passenger and freight service on the PRR's New Jersey lines, constructed at the railroad's own Altoona Works (now owned by Norfolk Southern) during 1873–1890.[2] They shared many parts with other standard classes.[3]

This design differed from the Class C (later D3) mainly in its longer firebox to burn slower-burning anthracite coal. Like all the early standardized 4-4-0s on the PRR, the Class C (Anthracite) had a wagon-top boiler with steam dome and a firebox between the two driving axles.[2][4]

In 1875, fifteen locomotives were either built[4] or converted[2] (sources differ) with 68-inch (1,727 mm) drivers for fast passenger service on the New Jersey lines. These were classified Class CA (Anthracite) or later D4a, and handled this traffic until 1881, when they were replaced by heavier power.

References

[edit]
  1. ^ a b c d e f g h i j k Pennsylvania Railroad. "PRR D4 Diagram". PRR.Railfan.net. Retrieved 2008-08-23.
  2. ^ a b c "PRR Steam Roster". Northeast Rails. Retrieved 2007-12-31.
  3. ^ Dredge, James (1879). The Pennsylvania Railroad. London: Engineering magazine.
  4. ^ a b Warner, Paul T. (1924). Motive Power Development on the Pennsylvania Railroad System. Philadelphia: Baldwin Locomotive Works.