Preprocessor (CAE)

This article may need to be rewritten to comply with Wikipedia's quality standards. You can help. The talk page may contain suggestions. (June 2023)

The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Preprocessor" CAE – news · newspapers · books · scholar · JSTOR (June 2023) (Learn how and when to remove this message)

In computer aided engineering (CAE) a preprocessor is a program which provides a graphical user interface (GUI) to define boundary conditions, materials, other physical properties and simulation control settings.^[1] This data is used by the subsequent computer simulation.^[2]

Steps that are followed in Pre-Processing

1> The geometry (physical bounds) of the problem is defined

2> The volume occupied by the fluid is divided into discrete cells (meshing)

3> The physical modeling is defined - E.g. equations of motion + enthalpy + radiation + species conservation

4> Boundary conditions are defined. This involves specifying the fluid behavior and properties at the boundaries of the problem. For transient problems, the initial conditions are also defined.

5> The simulation is started and the equations are solved iteratively as a steady state or transient

6> Finally a post-processor is used for the analysis and visualization of the resting solution

This computer graphics–related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e