RD-0124

RD-0124 (14D23)

Country of origin	Russia
Date	1993-2006
First flight	2006-12-27
Designer	KBKhA (Chief designers: Valery Kozelkov, Viktor Gorokhov [ru])[1]
Manufacturer	KBKhA in-house[2]
Application	Upper Stage
Associated LV	Soyuz-2, Angara, Soyuz-5
Predecessor	RD-0110
Status	In Production
Liquid-fuel engine
Propellant	LOX / RP-1
Cycle	Staged Combustion
Configuration
Chamber	4
Performance
Thrust, vacuum	294.3 kN (66,200 lbf)
Thrust-to-weight ratio	52.5
Chamber pressure	15.7 MPa (2,280 psi)
Specific impulse, vacuum	359 s (3.52 km/s)
Burn time	300 s
Dimensions
Length	1,575 mm (62.0 in)
Diameter	2,400 mm (94 in)
Dry mass	572 kg (1,261 lb)
Used in
Soyuz-2-1b and Soyuz-2-1v Block-I
References
References	[3][4][5][6]

The RD-0124 (GRAU Index 14D23) is a rocket engine burning liquid oxygen and kerosene in an oxygen-rich staged combustion cycle, developed by the Chemical Automatics Design Bureau in Voronezh.^[3] RD-0124 engines are used on the Soyuz-2.1b and Soyuz-2-1v. A variant of the engine, the RD-0124A, is used on the Angara rocket family's URM-2 upper stage.

RD-0124 engines use a multi-stage turbopump powered by pre-combustion of the engine propellants in the preburner. The kerosene fuel is used for regenerative cooling of the engine. Vehicle attitude control during ascent is provided by gimbaling the engine in two planes. The propellant tanks are helium-pressurized.^[7] Four combustion chambers are fed by a single turbopump system.^[7][8] The engine operates at a high chamber pressure and, for the type of propellants used, achieves a very high specific impulse of nearly 360 seconds in vacuum.

The inaugural flight of a launch vehicle using an RD-0124 engine took place on December 27, 2006, on the inaugural launch of the Soyuz-2.1b^[7] Orbital Sciences considered using the RD-0124 in the High Energy Second Stage (HESS) for their Antares rocket. It would have replaced the Castor 30B second stage.^[9]

This upper stage engine has been adapted to two different launch vehicles, the Soyuz-2-1b/v and the Angara family. As such, there are different versions:

• RD-0124 (GRAU Index 14D23). It is the version for the Soyuz-2-1b and Soyuz-2-1v Blok-I. It is the first liquid rocket engine designed in Russia after the Soviet period.^{[3][citation needed]}
• RD-0124A It is the version that powers the Angara URM-2, both the 1.2 and the bigger 5 versions. It differs on the base model in having an extended burn time of 424 seconds and, at 548 kg (1,208 lb), being 24 kg (53 lb) lighter.^[3]
• RD-0124DR Version developed between 2008 and 2013 for the Soyuz-2-3 project. It would differ from the base version in the implementation of a throttled point of 176.6 kN (39,700 lbf) with a reduced chamber pressure of 9.5 MPa (1,380 psi) and a specific impulse of 347s. The throttling capability meant a redesign of the preburner and the combustion chamber.^[10]
• RD-0125A Single nozzle version of the RD-0124A, it is planned as an upgrade for the Angara URM-2. It would enable the use of dual engines, which would enhance performance and reduce launch cost. Probably only planned for the Angara-5 URM-2, which is larger than that of the Angara-1.2.^[11]
• RD-0124MS A new Russian rocket engine with a thrust of 60 tons (533 kN), powered by naphthyl–liquid oxygen propellants. The engine consists of two blocks located on a common frame and a heat shield. Each consists of two diagonally located combustion chambers. The engine provides steering of the chambers in two planes, as well as able to work when one of the blocks is turned off. In development as of 2020 to power second stage of Soyuz-5 rocket.^[12]

• RD-0110 — previous engine.
• Soyuz-2-1b — first launch vehicle to use it.
• Soyuz-2-1v — second launch vehicle to use it.
• Angara — third launch vehicle to use it.
• Comparison of orbital rocket engines