SSh-39 and SSh-40

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "SSh-39 and SSh-40" – news · newspapers · books · scholar · JSTOR (January 2021) (Learn how and when to remove this message)

SSh-39 and SSh-40
SSh-39 helmet
Type	Combat helmet
Place of origin	Soviet Union
Service history
In service	1940-1968 (Soviet usage) 1949-today (other nations)
Used by	See Users for details
Wars	World War II Chinese Civil War Korean War Vietnam War Soviet-Afghan War Russo-Ukrainian War

The SSh-39 (Russian: СШ-39) and SSh-40 (Russian: СШ-40, both from стальной шлем, stal'noy shlem, lit. 'steel helmet') were two similar designs of steel combat helmet designed and used by the Soviet Union's Red Army. They were the main forms of helmet in use during World War II and had only superficial differences between them.

The SSh-39 was of simple, more modern design, and was much easier to manufacture than the SSh-36. The SSh-39 would be the standard design for Soviet helmets for the next 29 years, with only minor changes occurring during that time. It is also the design for the helmet on the Tomb of the Unknown Soldier in Moscow. The helmet was produced primarily in three factories, the Stalingrad Tractor Factory (designated CT in the ink stamp), the Red October Factory (ЗКО) also in Stalingrad, and the Lysva Metallurgical Factory (LMZ).^[1] The first liner was an eight-finger leather liner, similar to those of the German M35 to M42 Stahlhelm designs. Next came a short production of an eight-finger liner made of Gralex. The final version of the SSh-39 liner was cloth, similar to the SSh-36 liner. All three variations of the liner were suspended from the helmet by three metal tabs, which were riveted to the shell near the top. This helmet, like the earlier SSh-36, saw action in numerous campaigns before it was phased out in 1942 in favor of the SSh-40.

The SSh-40 was the most commonly seen in-service helmet used by the Soviet Union during World War II.^{[citation needed]} The only external difference between the SSh-39 and the SSh-40 was the six rivets near the bottom of the helmet, as opposed to the three near the top of the SSh-39 shell. Rivet placement of the SSh-40 was due to a newly introduced liner, simpler and sturdier than the previous versions. The liner consisted of three (later four during post-war) cloth or oilcloth pads connected with a cotton drawstring for size adjustment. The chinstrap was cloth and connected to D-rings on each side of the shell by tabs. The chinstrap ends were connected with a slip buckle, and a semi-circular metal piece was clamped to the end of the long chinstrap. Unlike the SSh-36 and SSh-39, the SSh-40 was only manufactured in three sizes, 1–3. The SSh-40 was supplemented by the SSh-60 which entered service in the 1960s and finally replaced by the SSh-68, though many remained in use as late as the Soviet withdrawal from Afghanistan.^[2] The SSh-40 is commonly confused with the Hungarian M50 helmet.

•  Donetsk People's Republic
•  Luhansk People's Republic
•  Russia: Issued to Russian Armed Forces and rear-line personnel
•  Ukraine: Issued to Territorial Defense Forces and partisan units

•  Afghanistan: SSh-40s, SSh-60s, and SSh-68s worn by government forces during the Soviet–Afghan War
•  China: Supplied during the Chinese Civil War
•  Czechoslovakia: Provided as aid during the late 1940s-early 1950s and replaced by the M53 helmet
•  Hungary: Locally produced as the M50 and replaced by the M70 helmet
•  North Korea: Supplied during the Korean War
•  Poland: Issued to members of the Polish Armed Forces in the East and replaced by the wz.1950 helmet
•  Soviet Union: Standard-issue helmet until the 1970s

Wikimedia Commons has media related to SSh-39.

Wikimedia Commons has media related to SSh-40.

• Clawson, R Russian Helmets: From Kaska to Stalshlyem 1916-2001 Bender Publishing