Sevagram Junction railway station

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "Sevagram Junction railway station" – news · newspapers · books · scholar · JSTOR (February 2019) This article may rely excessively on sources too closely associated with the subject, potentially preventing the article from being verifiable and neutral. Please help improve it by replacing them with more appropriate citations to reliable, independent, third-party sources. (February 2019) (Learn how and when to remove this message) (Learn how and when to remove this message)

Sevagram Junction
Indian Railways junction station
Indian Railways logo
General information
Location	Wardha, Maharashtra India
Coordinates	20°44′21″N 78°37′07″E / 20.7391°N 78.6185°E / 20.7391; 78.6185
Elevation	279 metres (915 ft)
Owned by	Indian Railways
Operated by	Central Railway
Line(s)	Howrah–Nagpur–Mumbai line New Delhi–Chennai main line
Platforms	5
Tracks	10
Construction
Structure type	At ground
Parking	Available
Other information
Station code	SEGM
Division(s)	Nagpur
History
Opened	1985
Electrified	1990–91
Location Sevagram Junction Location in Maharashtra Show map of Maharashtra Sevagram Junction Location in India Show map of India

Sevagram railway station is a railway station serving Sevagram town, in Wardha district of Maharashtra state of India. It is under Nagpur railway division of Central Railway zone of Indian Railways. It is an important junction station on the Howrah–Mumbai and Delhi–Chennai trunk line of the Indian Railways. This was known earlier (until the mid 90s) as "Wardha East" (station code WRE)

It is located at 279 m above sea level and has five platforms. As of 2016, at this station, 76 trains stop.^[1]

It is notable for the extremely steep rail curve south of the station requiring inbound and outbound trains to slow down considerably.^{[citation needed]}

The first passenger train in India travelled from Mumbai to Thane on 16 April 1853. By May 1854, Great Indian Peninsula Railway's Bombay–Thane line was extended to Kalyan. Bhusawal railway station was set up in 1860, and in 1867 the GIPR branch line was extended to Nagpur.^[2]

Before establishment of Sevagram railway station, north–south-bound trains had to get their engines reversed in opposite direction, which was a very time-consuming process. To avoid this problem, a new station for halting north–south-bound trains was established in 1985, named Sevagram railway station. Since then, trains running on New Delhi–Chennai main line halt at Sevagram railway station, bypassing Wardha railway station.

The railways in the Badnera–Wardha sector were electrified in 1990–1991.^[3]

The station has been equipped with new Route Relay Interlocking (RRI) for faster train operation.

• https://indiarailinfo.com/arrivals/sewagram-junction-segm/19

Preceding station	Indian Railways			Following station
Warud towards ?		Central Railway zone Howrah–Nagpur–Mumbai line		Wardha Junction towards ?
		Central Railway zone New Delhi–Chennai main line		Chitoda Junction towards ?