Williamstown line

Williamstown
Platforms at Williamstown Beach station in 2019.
Overview
Service type	Commuter rail
System	Melbourne railway network
Status	Operational
Locale	Melbourne, Victoria, Australia
First service	17 January 1859; 165 years ago (1859-01-17)
Current operator(s)	Metro Trains
Former operator(s)	Geelong and Melbourne Railway (G&MR) (1857–1859) Victorian Railways (VR) (1859–1974) VR as VicRail (1974–1983) MTA (The Met) (1983–1989) PTC (The Met) (1989–1998) Bayside Trains (1998–2000) M>Train (2000–2004) Connex Melbourne (2004–2009)
Route
Termini	Flinders Street (some continue to Frankston) Williamstown
Stops	12 (excluding City Loop stations)
Distance travelled	16.2 km (10.1 mi)
Average journey time	27 minutes
Service frequency	20 minutes weekdays peak 20 minutes weekdays off-peak and weekend afternoons 20–30 minutes at nights and weekend mornings 60 minutes early weekend mornings Triple frequency daytime between Flinders Street and Newport in combination with Werribee line Shuttle-only operation at nighttime and weekends between Newport and Williamstown Certain trains continue or start from Frankston
Line(s) used	Williamstown
Technical
Rolling stock	Comeng, Siemens, X'Trapolis 100
Track gauge	1,600 mm (5 ft 3 in)
Electrification	1500 V DC overhead
Track owner(s)	VicTrack
Route map Legend h:mm km zone continues as Frankston line to Frankston 0:00 0.0 Flinders Street ●●●●●●●●●●●● 1 0:04 1.2 Southern Cross ●●●●●●●●● 0:07 2.9 North Melbourne ●●●●● 0:10 4.7 South Kensington 0:13 6.9 Footscray ●●●●●●●●●■ 0:14 7.9 Seddon 0:16 8.8 Yarraville 0:18 10.5 Spotswood 0:21 11.9 Newport ● 0:23 13.5 North Williamstown 0:25 14.4 Williamstown Beach 0:27 15.4 Williamstown 1 h:mm km zone This diagram: view talk edit

The Williamstown line is a commuter railway line in the city of Melbourne, Victoria, Australia.^[1] Operated by Metro Trains Melbourne, it is the city's third shortest metropolitan railway line at 16.2 kilometres (10.1 mi).

The line runs from Flinders Street station in central Melbourne to Williamstown station in the inner west, serving 12 stations via Footscray, Yarraville, and Newport.^[2] The line operates for approximately 19 hours a day (from approximately 5:00 am to around 12:00 am) with 24-hour service available on Friday and Saturday nights. During peak hours, the line operates with headways of up to 20 minutes, ensuring frequent service for commuters. During off-peak hours, the service intervals are adjusted to provide service every 20–30 minutes, accommodating the lower demand.^[3] Trains on the Williamstown Line run with two three-car formations of Comeng, Siemens Nexas, and X'Trapolis 100 trainsets.^[4]

Together with the Southern Cross to Sunbury portion of the Deniliquin railway line, it is the first and oldest government-built line in Victoria, having opened on 13 January 1859.^[5] The line was built to serve the port at Williamstown, giving it economic importance to the then-colony as it established itself as an important international passenger port.^[5] The line has played an important part in the development of Victoria's railways, with the first workshops opening along the line in the 1800s.^[6]

Since the 2010s, due to the heavily utilised infrastructure of the Williamstown line, improvements and upgrades have been made. Works have included replacing sleepers, upgrading signalling technology, the removal of level crossings, the introduction of new rolling stock, and station accessibility upgrades.^[7]

• 
  The original Williamstown Workshops in 1870.
• 
  Railway (Nelson) Pier in Williamstown, 1883
• 
  Breakwater Pier, Williamstown was one of three piers connected directly to the railway line, 1890.

Construction of the line was started by the Melbourne, Mount Alexander, and Murray River Railway Company (MMA&MRR) with the construction of Batman Hill (now Southern Cross) station in 1853. Interestingly, the station did not see a train for another 6 years till services began in 1857.^[5] In response to 12 months of inaction by the MMA&MRR and pressure from the government and financial backers, the company organised a gala event at Williamstown on 12 June 1854.^[8]

Recognising the challenges faced by private companies and the pressing need for railway development, the government took action to address the situation. On 19 March 1856, despite only small sections being completed, the government intervened and acquired the line, assuming responsibility for its construction and further development.^[8]

In 1858, the Williamstown Workshops opened for the assembly of engines and carriages imported from England. Other buildings were soon added, with a total of seven locomotives built.^[6] During the late 1880s when railway management described the workshops as inadequate, moves were made to construct new workshops at Newport. By 1889 the new shops were open and Williamstown was closed.^[9][10]

Although it is now operated as a branch from the main Werribee/Geelong line at Newport, the line was originally built from the city with the Geelong line being the branch. The line officially opened in January 1859, but the section between the Newport Workshops and Williamstown Pier was in use by Geelong-line trains from October 1857 as it provided a connection to the ferry services departing from the pier.^[11] From Williamstown Pier, passengers could connect to a ferry across Hobsons Bay to Port Melbourne.^[11]

In August 1920, the line was fully electrified from North Melbourne to the Williamstown Pier. Later in 1927, the section from South Kensington to Footscray received three-position signalling with further extensions of the three position signalling occurring in 1929 and 1997.^[9]

Due to the proximity to the nearby wharf facilities, the Williamstown line provided a vital connection between Melbourne and the freight and passenger facilities at the port provided. The railway was built to serve the Government port at Williamstown, giving it great economic importance to the Colony of Victoria and establishing its role as an international passenger port.^[9]

The Newport Workshops in Victoria have played a significant role in the railway system, highlighting their importance through various expansion initiatives. Notable expansions took place from 1905 to 1915 and again from 1925 to 1930.^[12] At the peak of operation it was one of Victoria's largest and best-equipped engineering establishments, with up to 5,000 employees on site.^[13] The workshops had their own cricket grounds, and the game of Trugo is said to have been invented by workers on their lunch hour in the 1920s.^[14] In the late 1980s, the original segments of the workshops were removed from everyday use with modern workshops built along the eastern side of the site, which remains in use today.^[15]

The only section of the line to have closed was the Williamstown to Williamstown Pier section which closed in March 1987.

In January 2021, a major timetable rewrite resulted in increased frequencies and weekend daytime shuttle services being extended from Newport to Flinders Street.^[16] Peak hour weekday services now stop at South Kensington, which simplifies stopping patterns on the Werribee and Sunbury lines.^[16]

The Level Crossing Removal Project has announced the removal of 3 level crossings on the Williamstown line, to be completed in stages from 2021 to 2030. In 2021, one level crossing was removed at Ferguson Street in Williamstown.^[7] The crossing was removed by lowering the rail line onto a rail trench under the road, with the adjacent North Williamstown station also being lowered.^[7] A final two crossings will be removed along the line by 2030. The crossing at Hudsons Road in Spotswood will be removed by elevating the rail line above the road with Spotswood station also being rebuilt as part of the project.^[17] The crossing at Anderson Street, Yarraville, will be closed off as part of other level crossing removal works.^[17] At the end of these works, the Williamstown line will have 1 remaining crossing at Giffard St in Williamstown that is not scheduled for removal.

When the new cross-city rail corridor being built by the Metro Tunnel opens in 2025 there will be a reorganisation of the Melbourne rail network.^[18] The Victorian Department of Transport and Planning plans to return the Frankston line to the City Loop, with dedicated use of the Caulfield group tunnel track.^[19] This will mean Frankston line trains will no longer through-run with Werribee and Williamstown line trains, and will again stop at City Loop stations Flagstaff, Melbourne Central and Parliament.^[19] As part of the reconfiguration, the Werribee and Williamstown lines would instead begin through-running services to Sandringham for the first time.^[19]

Services on the Williamstown line operate from approximately 5:00 am to around 12:00 am daily.^[20] In general, during peak hours, train frequency is 10 minutes while services during non-peak hours drop to 20–40 minutes throughout the entire route.^[3] Services do not run through the City Loop, instead terminating at Flinders Street.^[21] Rather than running through the City Loop, services continue onto the Frankston line with boosted frequencies in combination with the Werribee line.^[22] During periods with low patronage, shuttle services operate between Newport and Williamstown operate in the evenings, weekend mornings, and as part of the Night Network. Night Network operates on Friday nights and weekends, with services running 24 hours a day with 60-minute frequencies available outside of normal operating hours.^[23]

Train services on the Williamstown line are also subjected to maintenance and renewal works, usually on selected Fridays and Saturdays. Shuttle bus services are provided throughout the duration of works for affected commuters.^[24]

Legend — Station status

• ◼ Premium Station – Station staffed from first to last train
• ◻ Host Station – Usually staffed during morning peak, however this can vary for different stations on the network.

Legend — Stopping patterns
Services do not operate via the City Loop

• ● – All trains stop
• ◐ – Some services do not stop
• | – Trains pass and do not stop

The Williamstown line has had a total of 8 operators since its opening in 1859. The first section of the line from near Newport to Williamstown Pier was originally opened by the government in 1857 and used by the Geelong and Melbourne Railway Company (G&MR) until the remainder of the government line to Spencer Street (now Southern Cross) opened 2 years later in 1859. This was operated by the government under the newly formed Victorian Railways (VR) using the full length from Williamstown Pier to Spencer Street (G&MR then used the VR line from Newport to Spencer Street). Many operators throughout its history have been government run. From its government acquisition in 1856 until the 1999 privatisation of Melbourne's rail network, four different government operators have run the line.^[26] These operators, Victorian Railways, the Metropolitan Transit Authority, the Public Transport Corporation, and Bayside Trains have a combined operational length of 141 years.

Bayside Trains was privatised in August 1999 and later rebranded M>Train. In 2002, M>Train was placed into receivership and the state government regained ownership of the line, with KPMG appointed as receivers to operate M>Train on behalf of the state government.^[27][28][29] Two years later, rival train operator Connex Melbourne took over the M>Train operations including the Williamstown line. Metro Trains Melbourne, the current private operator, then took over the operations in 2009. The private operators have had a combined operational period of 26 years.^[30]

v t e Williamstown line
Legend
km Multiple lines via Richmond or Jolimont City Loop 0.0 Flinders Street ●●●●●●●●●●●● 1.4 Parliament ●●●●●●●●● 2.7 Melbourne Central 3.3 Flagstaff 1.2 Southern Cross ● City Loop Albury, North East SG & Western SG lines to Albury, Sydney & Adelaide 2.9 North Melbourne ●●●●● 3.1 Dynon Road Upfield line to Upfield 3.7 CityLink 3.7 Moonee Ponds Creek Craigieburn, Seymour & Shepparton lines via Essendon Flemington Racecourse line to Flemington Racecourse South Kensington–West Footscray line to West Footscray 4.7 South Kensington Melbourne Metro Tunnel to Caulfield (under construction) Saltwater River (demolished) 5.5 Maribyrnong River Maribyrnong line to Maribyrnong River Terminal (dismantled) 6.6 Hopkins Street 6.9 Footscray ●●●●●●●●●■ South Kensington–West Footscray, North East SG & Western SG lines to Albury, Sydney & Adelaide or Southern Cross Multiple lines via Sunshine Footscray (Suburban) (demolished) 7.2 Napier Street 7.9 Seddon 8.5 Somerville Road 8.8 Yarraville 9.4 Francis Street (Docklands Highway) 9.6 Stony Creek 9.8 West Gate Freeway 10.5 Spotswood ANZAC & Goninans Sidings (was Spotswood Workshops) Newport–Sunshine & Western SG lines to Sunshine & Southern Cross 11.8 Newport ● 11.9 Melbourne Road Greenwich (demolished) | Werribee & Western SG lines to Werribee & North Shore 12.7 Newport Workshops | Garden Platform (closed) 13.5 North Williamstown 13.6 Ferguson Street 14.4 Williamstown Beach 15.4 Williamstown 15.6 end of Metro area (also site of Williamstown Workshops) Williamstown Yard | Williamstown Pier (both demolished) Thompson's Sidings (demolished) Breakwater | Gellibrand | Nelson Piers (all demolished) km
broad gauge standard gauge dual gauge

Interactive map of the Williamstown line in western Melbourne, also showing the Werribee line.

The Williamstown line forms a mostly straight route from the Melbourne central business district to its terminus in Williamstown. The route is 16.2 kilometres (10.1 mi) long and is fully doubled tracked from Flinders Street to its terminus (excluding Williamstown station where the track narrows to one track at the single platform). After changing from Frankston services at Flinders Street, the Williamstown line traverses flat country with few curves and minimal earthworks for most of the line. Some sections of the line have been elevated or lowered to remove level crossings, including at Williamstown North station. There is only one crossing remaining on the line which is not scheduled to be removed.^[7]

The line follows the same alignment as the Werribee line with the two services splitting onto different routes at Newport. The Williamstown line continues its southern alignment, whereas the Werribee line takes a western alignment towards their final destinations.^[31] Most of the rail line goes through built-up suburbs and heavy industrial areas.^[31]

The line serves 12 stations across 16.2 kilometres (10.1 mi) of track. The stations are a mix of elevated, lowered, and ground level designs. The many elevated and lowered stations being constructed as part of level crossing removals.^[32] From 2030, Spotswood station will be elevated as part of additional level crossing removal works.^[33]

Station	Accessibility	Opened	Terrain	Train connections	Other connections
Flinders Street	Yes—step free access	1854[34]	Lowered	16 connections  Alamein line   Belgrave line   Craigieburn line   Cranbourne line   Flemington Racecourse line   Frankston line   Gippsland line   Glen Waverley line   Hurstbridge line   Lilydale line   Mernda line   Pakenham line   Sandringham line   Sunbury line   Upfield line   Werribee line
Southern Cross		1859[34]	Ground level	27 connections  Alamein line   Albury line   Ararat line   Ballarat line   Belgrave line   Bendigo line   Craigieburn line   Cranbourne line   Echuca line   Flemington Racecourse line   Geelong line   Gippsland line   Glen Waverley line   Hurstbridge line   Lilydale line   Maryborough line   Mernda line   NSW TrainLink Southern   Pakenham line   Seymour line   Shepparton line   Sunbury line   Swan Hill line   The Overland   Upfield line   Warrnambool line   Werribee line
North Melbourne				7 connections  Craigieburn line   Flemington Racecourse line   Seymour line   Shepparton line   Sunbury line   Upfield line   Werribee line
South Kensington	No—steep ramp	1891[34]		1 connection  Werribee line
Footscray	Yes—step free access	1859[34]		10 connections  Ararat line   Ballarat line   Bendigo line   Echuca line   Geelong line   Maryborough line   Sunbury line   Swan Hill line   Warrnambool line   Werribee line
Seddon	No—steep ramp	1906[34]		1 connection  Werribee line
Yarraville	Yes—step free access	1871[34]
Spotswood		1878[34]
Newport	No—steep ramp	1859[34]
North Williamstown	Yes—step free access		Below ground
Williamstown Beach			Ground level
Williamstown

The Williamstown line uses diverse types of electric multiple unit (EMU) trains that are operated in a split six-car configuration, with three doors per side on each carriage. The primary rolling stock featured on the line is the Comeng EMUs, built by Commonwealth Engineering between 1981 and 1988.^[36] These train sets are the oldest on the Melbourne rail network and subsequently will be replaced by the mid 2030s.^[37] Siemens Nexas EMUs are also widely featured on the line, originally built between 2002 and 2005. These train sets feature more modern technology than the Comeng trains.^[38] The final type of rolling stock featured on the line is the X'Trapolis 100 built by Alstom between 2002 and 2004 as well as between 2009 and 2020.^[39] All of these rolling stock models are widely used on other lines across the metropolitan network and work as the backbone of the network.

Alongside the passenger trains, Williamstown line tracks and equipment are maintained by a fleet of engineering trains. The four types of engineering trains are: the shunting train; designed for moving trains along non-electrified corridors and for transporting other maintenance locomotives, for track evaluation; designed for evaluating track and its condition, the overhead inspection train; designed for overhead wiring inspection, and the infrastructure evaluation carriage designed for general infrastructure evaluation.^[40] Most of these trains are repurposed locomotives previously used by V/Line, Metro Trains, and the Southern Shorthaul Railroad.^[40]

From the middle of 2020s, the next generation of the X'Trapolis family of electric EMUs—the X'Trapolis 2.0—will be introduced. This new model will fully replace the existing fleet of Comeng EMUs currently operating on the line currently with new, modern, and technologically advanced trains. The new trains will feature:^[41]

• Modernised doors to reduce the boarding times at stations to under 40 seconds
• Passenger information systems to display that train's journey in real time
• Higher energy efficiency to work with a lower network voltage, to fit in line with modern rail systems overseas
• New interior designs including tip-up seating to allow space for wheelchair spaces.
• Designated bicycle storage areas
• Passenger operated automatic wheelchair ramps located behind driver cabs
• 6 cars fully walk through carriages

In compliance with the Disability Discrimination Act of 1992, all stations that are new-built or rebuilt are fully accessible and comply with these guidelines.^[42] The majority of stations on the corridor are fully accessible, however, there are some stations that have not been upgraded to meet these guidelines.^[43] These stations do feature ramps, however, they have a gradient greater than 1 in 14.^[43] Stations that are fully accessible feature ramps that have a gradient less than 1 in 14, have at-grade paths, or feature lifts.^[43] These stations typically also feature tactile boarding indicators, independent boarding ramps, wheelchair accessible myki barriers, hearing loops, and widened paths.^[43][44]

Projects improving station accessibility have included the Level Crossing Removal Project, which involves station rebuilds and upgrades and other individual station upgrade projects.^[45][46] These works have made significant strides in improving network accessibility, with more than 75% of Williamstown line stations classed as fully accessible. This number is expected to grow within the coming years with the completion of level crossing removal works on the corridor by 2029.^[47]

The Williamstown line uses three position signalling which is widely used across the Melbourne train network.^[48] Three position signalling was first introduced in 1927, with the last section of the line converted to the new type of signalling in 1997.^[49]

• Williamstown line timetable
• Network map
• Media related to Williamstown railway line at Wikimedia Commons