Floyd–Steinberg dithering
From Wikipedia the free encyclopedia
Floyd–Steinberg dithering is an image dithering algorithm first published in 1976 by Robert W. Floyd and Louis Steinberg. It is commonly used by image manipulation software. For example when converting an image from a Truecolor 24-bit PNG format into a GIF format, which is restricted to a maximum of 256 colors.
Implementation
[edit]The algorithm achieves dithering using error diffusion, meaning it pushes (adds) the residual quantization error of a pixel onto its neighboring pixels, to be dealt with later. It spreads the debt out according to the distribution (shown as a map of the neighboring pixels):
The pixel indicated with a star (*) indicates the pixel currently being scanned, and the blank pixels are the previously-scanned pixels. The algorithm scans the image from left to right, top to bottom, quantizing pixel values one by one. Each time, the quantization error is transferred to the neighboring pixels, while not affecting the pixels that already have been quantized. Hence, if a number of pixels have been rounded downwards, it becomes more likely that the next pixel is rounded upwards, such that on average, the quantization error is close to zero.
The diffusion coefficients have the property that if the original pixel values are exactly halfway in between the nearest available colors, the dithered result is a checkerboard pattern. For example, 50% grey data could be dithered as a black-and-white checkerboard pattern. For optimal dithering, the counting of quantization errors should be in sufficient accuracy to prevent rounding errors from affecting the result.
For correct results, all values should be linearized first, rather than operating directly on sRGB values as is common for images stored on computers.
In some implementations, the horizontal direction of scan alternates between lines; this is called "serpentine scanning" or boustrophedon transform dithering.
The algorithm described above is in the following pseudocode. This works for any approximately linear encoding of pixel values, such as 8-bit integers, 16-bit integers or real numbers in the range [0, 1].
for each y from top to bottom do for each x from left to right do oldpixel := pixels[x][y] newpixel := find_closest_palette_color(oldpixel) pixels[x][y] := newpixel quant_error := oldpixel - newpixel pixels[x + 1][y ] := pixels[x + 1][y ] + quant_error × 7 / 16 pixels[x - 1][y + 1] := pixels[x - 1][y + 1] + quant_error × 3 / 16 pixels[x ][y + 1] := pixels[x ][y + 1] + quant_error × 5 / 16 pixels[x + 1][y + 1] := pixels[x + 1][y + 1] + quant_error × 1 / 16
When converting greyscale pixel values from a high to a low bit depth (e.g. 8-bit greyscale to 1-bit black-and-white), find_closest_palette_color() may perform just a simple rounding, for example:
find_closest_palette_color(oldpixel) = round(oldpixel / 255)
The pseudocode can result in pixel values exceeding the valid values (such as greater than 255 in 8-bit greyscale images). Such values should ideally be handled by the find_closest_palette_color() function, rather than clipping the intermediate values, since a subsequent error may bring the value back into range. However, if fixed-width integers are used, wrapping of intermediate values would cause inversion of black and white, and so should be avoided.
The find_closest_palette_color() implementation is nontrivial for a palette that is not evenly distributed, however small inaccuracies in selecting the correct palette color have minimal visual impact due to error being propagated to future pixels. A nearest neighbor search in 3D is frequently used.
See also
[edit]- Atkinson dithering, a variant of Floyd–Steinberg dithering designed by Bill Atkinson
References
[edit]- Floyd–Steinberg Dithering (Graphics course project, Visgraf lab, Brazil)
- R.W. Floyd, L. Steinberg, An adaptive algorithm for spatial grey scale. Proceedings of the Society of Information Display 17, 75–77 (1976).