envsys
From Wikipedia the free encyclopedia
| Original author(s) | Juan Romero Pardines (2007) |
|---|---|
| Developer(s) | The NetBSD Foundation, Inc. |
| Initial release | 1 July 2007 |
| Repository | /sys/sys/envsys.h |
| Written in | C |
| Operating system | NetBSD since 5.0 |
| Type | system monitoring |
| Licence | BSD licence#4-clause |
| Website | envsys(4) |
| Original author(s) | Tim Rightnour and Bill Squier (2000) |
|---|---|
| Developer(s) | The NetBSD Foundation, Inc. |
| Initial release | 15 December 1999 |
| Final release | NetBSD 4.0.1 / 14 October 2008 |
| Repository | /sys/sys/envsys.h |
| Written in | C |
| Operating system | NetBSD 1.5 to 4.0.1 |
| Type | system monitoring |
| Licence | BSD licence#4-clause |
| Website | envsys(4) in NetBSD 4.0 |
The envsys framework is a kernel-level hardware monitoring sensors framework in NetBSD. As of 4 March 2019[update], the framework is used by close to 85 device drivers to export various environmental monitoring sensors, as evidenced by references of the sysmon_envsys_register[1] symbol within the sys path of NetBSD; with temperature sensors, ENVSYS_STEMP,[2] being the most likely type to be exported by any given driver.[3]: 32 Sensors are registered with the kernel through sysmon_envsys(9) API.[4] Consumption and monitoring of sensors from the userland is performed with the help of envstat utility through proplib(3) through ioctl(2) against the /dev/sysmon pseudo-device file,[5] the powerd power management daemon that responds to kernel events by running scripts from /etc/powerd/scripts/,[6][7] as well as third-party tools like symon and GKrellM from pkgsrc.
Features
[edit]The framework allows the user to amend the monitoring limits specified by the driver, and for the driver to perform monitoring of the sensors in kernel space, or even to programme a hardware chip to do the monitoring for the system automatically.[3]: §7.1 Two levels of limits are defined: critical and warning, both of which additionally extend to an over and an under categorisation.[3]: §7.1 If limit thresholds are crossed, a kernel event may be generated, which can be caught in the userland by powerd to execute a pre-defined user script.[6][7] By comparison, in OpenBSD's hw.sensors, the monitoring of user-defined values is performed in userspace by sensorsd.
As of 2019[update], the framework itself does not facilitate computer fan control, although the drivers could still implement interfacing with the fan-controlling capabilities of their chips through other means, for example, through a driver-specific sysctl interface, which is the approach taken by the dbcool(4) driver.[8] However, the drivers for the most popular Super I/O chips like lm(4) and itesio(4) do not implement any fan control at all (in fact, historically, in all of OpenBSD, NetBSD and DragonFly, these drivers don't even report the duty cycle of the fans — only the actual RPM values are reported).[9][10]
History
[edit]The framework undergone two major revisions: the first version of envsys.h was committed on 15 December 1999; with envsys.4 man page following on 27 February 2000. Between 2000 and 2007, the manual page for envsys(4) in NetBSD stated that the "API is experimental", and that the "entire API should be replaced by a sysctl(8)", "should one be developed";[11][12] it can be noted that in 2003 this was the exact approach taken by OpenBSD with sysctl hw.sensors when some of the envsys(4) drivers were ported to OpenBSD.[3]: §6.1
The second revision came about on 1 July 2007. The serialisation with userland was reimplemented using property lists with the help of NetBSD's new proplib(3) library (the underlying transport layer between the kernel and userland still being done through ioctl).[13][3]
The envsys framework was the precursor to OpenBSD's sysctl hw.sensors framework in 2003, and many drivers, as well as some sensor types, have been ported back and forth between NetBSD and OpenBSD. Support for sensors of drive type has been added to NetBSD on 1 May 2007, similar to drive type in OpenBSD, which was at the same time when bio(4) and bioctl were ported from OpenBSD to NetBSD.[3]: §7.1
See also
[edit]
References
[edit]- ^ "
sysmon_envsys_register()". BSD Cross Reference. NetBSD. - ^ "
ENVSYS_STEMP". BSD Cross Reference. NetBSD. - ^ a b c d e f Constantine A. Murenin (2010-05-21). "7.1. NetBSD envsys / sysmon". OpenBSD Hardware Sensors — Environmental Monitoring and Fan Control (MMath thesis). University of Waterloo: UWSpace. hdl:10012/5234. Document ID: ab71498b6b1a60ff817b29d56997a418.
- ^ Juan Romero Pardines; The NetBSD Foundation, Inc. (2007–2008). "sysmon_envsys(9) — kernel part of the envsys 2 framework". BSD Cross Reference. NetBSD.
- ^ "_PATH_SYSMON in paths.h". BSD Cross Reference. NetBSD.
#define _PATH_SYSMON "/dev/sysmon" - ^ a b Wasabi Systems, Inc. (2003). "powerd(8) — power management daemon for sysmon". BSD Cross Reference. NetBSD.
- ^ a b "/etc/powerd/scripts/". BSD Cross Reference. NetBSD.
- ^ Paul Goyette; The NetBSD Foundation, Inc. (2008). "dbcool(4): dev/i2c/dbcool.c". BSD Cross Reference. NetBSD. Retrieved 2019-03-25.
- ^ "lm(4): dev/ic/nslm7x.c". BSD Cross Reference. NetBSD. Retrieved 2019-03-25.
- ^ "itesio(4): dev/isa/itesio_isa.c". BSD Cross Reference. NetBSD. Retrieved 2019-03-25.
- ^ Tim Rightnour; Bill Squier (2007-12-19). "envsys -- Environmental Systems API". NetBSD 4.0.
This API is experimental and may be deprecated at any time ... This entire API should be replaced by a sysctl(8) interface or a kernel events mechanism, should one be developed.
- ^ Constantine A. Murenin (2007-04-17). "3.5. NetBSD's sysmon(4)". Generalised Interfacing with Microprocessor System Hardware Monitors. Proceedings of 2007 IEEE International Conference on Networking, Sensing and Control, 15–17 April 2007. London, United Kingdom: IEEE. pp. 901–906. doi:10.1109/ICNSC.2007.372901. ISBN 978-1-4244-1076-7. IEEE ICNSC 2007, pp. 901—906.
- ^ Hubert Feyrer (2007-06-21). "envsys2". Retrieved 2019-03-04.